Civinfo - View Single Post

kskanoy · 1st September 2007, 14:14

Getting the power cable from the front to the back was quite a challenge. It is really tight space!

My friend helping me with his small tools :P

Thank's too the HOW TO guide here at civinfo changing the speakers / tweeters went fine

The beauty/beast that's going in...

The box, it is small because it only needs 37 litres with the magnet out.

First test

Cutting out a copy for the bottom plate

And it fitted perfectly!

And with the sub

Fitting of the capacitors

Plexiglas for protection

Preview and testing in the car

Time for some clothing. You can see here that i used racing grill for the capacitors. When it's mounted it willl be 2x30cm blue led stick that will light under it.

Almost there now!

1st September 2007, 14:14	#3 (permalink)
kskanoy Valve Cap Join Date: 16th July 2007 Location: Norway Posts: 39 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	mounting Getting the power cable from the front to the back was quite a challenge. It is really tight space! My friend helping me with his small tools :P Thank's too the HOW TO guide here at civinfo changing the speakers / tweeters went fine The beauty/beast that's going in... The box, it is small because it only needs 37 litres with the magnet out. First test Cutting out a copy for the bottom plate And it fitted perfectly! And with the sub Fitting of the capacitors Plexiglas for protection Preview and testing in the car Time for some clothing. You can see here that i used racing grill for the capacitors. When it's mounted it willl be 2x30cm blue led stick that will light under it. Almost there now!