[Greedy]

Originally Posted by opjepass

Hey guys,
I started trying to install my Cisbo`s today.
Removed all the screws, pins, clips, etc. like posted in the thread, so I think that the bumper should be prepared to be removed right now.
But then my problem appeared:
I do absolutely not have any idea of how to remove the bumper.
I tryed pulling, pushing, shaking, was trying smooth and gently, then used abit of power, but in now way I tried to get the bumper off I had success.
The manual says: The bumper needs to be pushed forward and the forward most edge prised out each side (See photo XX).
Which photo shows this? I can`t find one.

Please guys, can someone of you who have already installed the Cisbo`s tell me what exactly to do to get the bumper off?
Has anybody of you made some additional pics that show what to do?

Any help would be really appreciated...

Thanks a lot, yours opjepass

Been a while so look out for a better post but as you seem desperate then following advise migth help

Having undone the screws under the back edge of the rr wheel arch you should see that the bumper slots in to a plastic bracket which is attached to the metal of the w/arch. You need to ease the bumper out of that so it is then proud of the car then the bumper should be able to move backwards.

Think that's right but as I say it's been a while. Anyone else?