Quote:
Originally Posted by csmcqueen
I suspected you may have to solder it to the main board, but not a big task as its only 2 wires (I would use a thin kynar 30awg wire).
You will have exactly the same problem with the bentley style keys because of the flip mechanism so that will probably put a lot of people off (unless they want to take them to someone else to solder for them).
BTW Stef - Good job, looks much better than the original but I didnt realise it was quite that big.
|
Due to the lenght of the metal key it can not be made shorter.
Due to the width and hight of the original key internal, it can not be made smaller and thinnner.
I estimate it is 10% bigger then the VW one