Civinfo - View Single Post

webby · 26th March 2008, 08:42

Hi ma98ard,
The blinds are in 4 parts. The side ones are "fixed" using 3 small plastic tabs which clip to the blinds wireframe and slide between the frame and the glass. The side blinds have a fabric tag attached, so you can pull them out again.
The rear window blind is split vertically into 2 parts, which you join down the middle using 2 clips. You get another 3 or 4 plastic tabs each side, which once again go between glass and frame.
The view behind (CTR) is almost non-existant via the internal mirror.....
Hope this helps.

26th March 2008, 08:42	#9 (permalink)
webby Supporter Valve Cap Join Date: 13th November 2007 Location: Switzerland Posts: 16 Thanks: 0 Thanked 0 Times in 0 Posts	Hi ma98ard, The blinds are in 4 parts. The side ones are "fixed" using 3 small plastic tabs which clip to the blinds wireframe and slide between the frame and the glass. The side blinds have a fabric tag attached, so you can pull them out again. The rear window blind is split vertically into 2 parts, which you join down the middle using 2 clips. You get another 3 or 4 plastic tabs each side, which once again go between glass and frame. The view behind (CTR) is almost non-existant via the internal mirror..... Hope this helps. Last edited by webby; 26th March 2008 at 08:45.