Quote:
Originally Posted by allan40alt
I thought I would see how easy it was to remove the centre panel behind the light and I have to ask just how hard do you have to yank on the centre cover? 
I managed to get a finger behind one corner and pulled really firmly but it wouldn't budge the rest of the cover. I even hooked a 90deg angle screwdriver under the corner and pulled, but still no luck. 
I gave up when it seemed as if I was either going to damage the panel itself, or the panels either side. 
Is there a knack to doing it?  |
Hi, I removed mine by getting one of the long edges prised back enough to get my fingers behind it, and then gave it a good pull towards me..Dont worry there is nothing behind it that you will damage when pulling it, the only thing that might happen is 1 or 2 of the plastic studs that are holding it may not come out of the hole in the panel, but all you have to do is remove them with a thin blade screwdriver and put them back in the trim panel. Hope this helps...