View Single Post
Old 29th April 2008, 12:49   #710 (permalink)
tzo
Valve Cap
 
tzo's Avatar
 
Join Date: 6th January 2008
Location: Volos GR GR
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by Harlequin View Post
I damaged my transponder when I did mine. I only had a 25W soldering iron and thought I was clever enough to get away with it.

Turns out I wasn't.

HOWEVER: I figured that because the TS is attached to the Circuit board on this model key and was free floating on the last one that there was a good chance that the Transponder is actually programmed my one of the other chips.

Based on this I jumped on ebay and bought a 2nd hand (already cut) key off some bloke and went at it again - having bought a smaller soldering iron.

I was right - transponder from a key that has nothing to do with my car - soldered to my remote key electronics - works a treat.

The 2nd hand key cost me £8... Much cheaper than a new key from Honda - and now I have a spare battery as well.

-H

PS: the code printed on the TS of the key I bought was NOT the same as the one on my original - still worked.
thanks Harlequin.yours info were very helpful.it would be very polite if you have also a link to buy a second hand key ?thanks a lot !
tzo is offline   Reply With Quote