[RogS]

Ok so i just orderd a new amplifier.

DLS Performance CA-51
Number of channels: 5
Amplifier class: AB
Output power in 4 ohm: 4 x 50 W
Output power in 2 ohm: 4 x 80 W
Mono bridge mode 4 ohm: 2 x 150 W
Mono sub channel 4 ohm: 170 W
Mono sub channel 2 ohm: 225 W
Damping factor: > 100
S/N ratio, A-weighted: > 100 dB
Frequency range: 10 Hz - 35 kHz
Input sensitivity: 0,25 - 5 V
Input impedance: > 10 kohm
Input impedance, high level: 100 ohm
Filters channel A & B: HP: 15-500 Hz. LP: 50-500 Hz / 05 - 5 kHz (x10)
Filters channel C & D: HP: 15-500 Hz / 150 Hz - 5 kHz (x10).
Filters channel E: LP: 60 - 120 Hz + subsonic 25 Hz
High level input with auto start: 1
Power consumption (idle): 1 A
Power consumption (max): 90 A
Rec. power cable: Minimum 4AWG / 21 mm2
Fuses: 3 x 30 A
Dimension (W x D x H): 70 x 437 x 268 mm / 2,92 x 17,2 x 10,55 "
Weight: 5 kg / 11 lb

I hope this will do the job