|
Hi Mark996, im in southampton. I fitted the kit myself following the instructions used in the 1st post. I was a bit nerve racking taking apart my new type r but it all went back together alright!
If you are ordering the gateway 100 from the link in the 1st post you will not need the y-cable as dension have modified their cable so it has a replicator already wired in. When taking the car apart the bits of trim need quite a tug to get the clips out, and to get the gear lever surround off you need to pull it from the top first, it works best if you use a flat head screw driver to lever the trip up by the little storage compartment. This took me quite a while to work out!
Any questions just let me know.
|