This is a summary of
ABP's work on the FN2 (all written by Chris/
azinho):
Brakes! Had a good look at the brakes and other than the caliper being badged Type R and being relocated to the front of the wheel as opposed to the EP3 being at the rear the discs & pads are the same as the early car. Tried to fit a StopTech 4-pot kit but no joy - The floating disc is hard against the ball joint so no 4-pot kits for now......... We then trial fitted the PowerSlot 350mm front big-disc conversion kit and this fits great (with a little mod or 2) and fills the 18" wheel really well. If you have the 19" rages you need this kit to stop your brakes looking so ridiculously small! The kit not only looks great but being 50mm larger in diameter and grooved offers far better braking ability with improved cooling and reduced brake fade which can be an issue on sustained hard fast-road use. Not anymore
. The brakes are now far better even using the standard Honda pads. We will be trying some pad options over the next few weeks and will keep you all posted.
PowerSlot front 350mm big-disc brake conversion kit (includes pair of 350mm grooved discs, caliper relocation brackets and fitting kit) is £375 inc vat with an additional £90 fitting charge if required.
1) Milltek Sport ABP stainless steel cat back exhaust system - Non-resonated centre section, discreet tailpipes within the original triangular bumper trim £495.00 inc vat
2) Milltek Sport ABP stainless steel cat back exhaust system - Non-resonated centre section, 90mm Polished Round tailpipes requiring the removal of original triangular bumper trim £545.00 inc vat
3) Milltek Sport ABP stainless steel cat back exhaust system - Resonated centre section, discreet tailpipes within the original triangular bumper trim £570.00 inc vat
4) Milltek Sport ABP stainless steel cat back exhaust system - Resonated centre section, 90mm Polished Round tailpipes requiring the removal of original triangular bumper trim £620.00 inc vat
These systems are 100% exclusive to ABP Motorsport and will not be available from either Milltek Sport or any other Milltek Sport dealers.
We are taking advance orders and the initial batch of 10 systems will be available to us before the end of August. These will sell out quickly but Milltek insist on ititial production runs of only 10 units. Our next batch of systems (probably 30+) will not be through until late September
.
We are ordering 8 Non-resonated 'discreet' systems and 2 90mm Round systems so if you want them call and place your orders on 01270 567177 ASAP to avoid missing out.
Standard:
212.7 BHP @ 7625rpm
&
152.5 lb/ft @ 6065rpm
ABP Milltek Sports cat-back system fitted and here are the results:
219.5 BHP @ 7596rpm
&
159.8 lb/ft @ 6100rpm
A good start guys +6.8bhp power gain along with torque increase of +7.3 lb/ft
Attachment 5335
Attachment 5336
Attachment 5337
Attachment 5338
Attachment 5339
Attachment 5340
Attachment 5341
Attachment 5342
Attachment 5343