Civinfo - View Single Post - Phone DIY Help on Parrot Kit and Dension Icelink

Meino · 24th November 2006, 10:40

Phuket,

I probably going to build in my parrot carkit comming Sunday... I also use the iso2car connecter. You can see that the plug of the parrot kit which goes into the iso2car connector has a red and a orange wire, with a fuse. These 2 are used for the power. It is possible you have to switch the wires of the red and orange.. You can do that with the fuse holders. Connect the kit and look if it works. If it says ´goodbeye´ when turning off the ignition, then the wires are ok, else you have to switch the red and orange as told above.
At this moment I still don´t know where to put my mic... Maybe someone can tell. The other questions I cannot answer yet....

24th November 2006, 10:40	#2 (permalink)
Meino Supporter Triangular Exhaust Join Date: 18th October 2006 Location: Netherlands Posts: 474 Thanks: 0 Thanked 0 Times in 0 Posts	Phuket, I probably going to build in my parrot carkit comming Sunday... I also use the iso2car connecter. You can see that the plug of the parrot kit which goes into the iso2car connector has a red and a orange wire, with a fuse. These 2 are used for the power. It is possible you have to switch the wires of the red and orange.. You can do that with the fuse holders. Connect the kit and look if it works. If it says ´goodbeye´ when turning off the ignition, then the wires are ok, else you have to switch the red and orange as told above. At this moment I still don´t know where to put my mic... Maybe someone can tell. The other questions I cannot answer yet....