Civinfo - View Single Post

AL56 · 1st December 2006, 21:24

Hi, Allan & Bassa, For supply & fit two heater kits front seats only. £300 inc,vat. Plus Wiring harness, two on off switches round ones. Only one heat setting, two in line 10amp fuses,relays. They strip the seats completely & fit two heated pads too each seat. the pads are secured to the metal frame with plastic tie clips to avoid any electrical shorts, then put seats back together both wiring looms come out under the seats and tie clipped with relays under seat out of sight They still give the full warranty.Thats as far as they go.
While they had the seats out i removed the centre console and put the wiring loom in position,threaded one each side under the carpet and came through floor carpet at side of wires already there leaving enough to slide the seat back and forth then connected the multi plugs to heat pads. I then coiled up the wiring under the console avoiding the hand brake lever etc fittted console left it at that called it a day. I was there for about four hours.

1st December 2006, 21:24	#48 (permalink)
AL56 Wheelnut Join Date: 22nd September 2006 Location: England Posts: 97 Thanks: 0 Thanked 0 Times in 0 Posts	Heated Seats Fitted to Bespoke Leather. Hi, Allan & Bassa, For supply & fit two heater kits front seats only. £300 inc,vat. Plus Wiring harness, two on off switches round ones. Only one heat setting, two in line 10amp fuses,relays. They strip the seats completely & fit two heated pads too each seat. the pads are secured to the metal frame with plastic tie clips to avoid any electrical shorts, then put seats back together both wiring looms come out under the seats and tie clipped with relays under seat out of sight They still give the full warranty.Thats as far as they go. While they had the seats out i removed the centre console and put the wiring loom in position,threaded one each side under the carpet and came through floor carpet at side of wires already there leaving enough to slide the seat back and forth then connected the multi plugs to heat pads. I then coiled up the wiring under the console avoiding the hand brake lever etc fittted console left it at that called it a day. I was there for about four hours.