This will stop the seat belt beeper for the driver only, the rest of the system is unaffected. It's for those of us who get in, start the engine and then put the belt on. Or for diesel drivers who get in, switch on the heater coils (beep beep beep), put the belt on and then start the engine.
Under no circumstances does anyone condone driving even 1mm without their seatbelt. Only do this if you are confident you can remember to put your belt on without the aid of a beeper.
Tools needed: none.
Skill needed: none.
Time to complete: 5-15 seconds.
1. Slide the drivers seat all the way forward, and get your head in the footwell so you can see the underside of the seat.
2. Near the front, and slightly towards the centre of the car, is a blue plug in a white socket. Press the release on the underside of the blue plug, and it removes towards the front of the car.
3. You now have no beeper to remind you to put your belt on. It is up to you to remember, and it is both illegal and dangerous to drive without wearing a seatbelt.
seatbeltplug.jpg
Edit:
A clearer photo and where it was taken from (to aid location):
seatbelt_connector.jpg
wherefrom.jpg