Civinfo - View Single Post - Bodywork Central Clear Plastic Fouling Bumper

allan40alt · 13th August 2006, 10:22

I've just checked mine and the central plastic section has a tiny rubber buffer between the lower corner and the bumper. Also, the side gap between the central and lights unit on your photos appears to be 5mm or more, mine is only 2mm on either side. Seems as if your bumper has been pushed in and that has squeezed the clear plastic sections out of alignment.

13th August 2006, 10:22	#9 (permalink)
allan40alt Supporter Civinfo guru Join Date: 6th August 2006 Location: Rugby, Warwickshire. Posts: 2,253 Thanks: 13 Thanked 33 Times in 31 Posts iTrader: (0)	I've just checked mine and the central plastic section has a tiny rubber buffer between the lower corner and the bumper. Also, the side gap between the central and lights unit on your photos appears to be 5mm or more, mine is only 2mm on either side. Seems as if your bumper has been pushed in and that has squeezed the clear plastic sections out of alignment.