|
PTR,
This is the air duct outlet located below the glovebox. It's hard to gain access to it so unless touching it cures the rattle, best leave alone.
To gain access the glovebox has to be removed. Then you can see where it joins the rest of the heater ducting, two pawls hold it on.
The part is made of two pieces. I found the seams between them were loose and tightened them by packing the clips. When refitting, I used some soft plastercine type sealant similar to Blu-tac to stop any movement in the joint.
Not sure it's worth the effort, but I had the glovebox removed for another reason so it was no problem.
|