Mounts ipaq - mounting?

klaasbakker99 · 10th February 2007, 23:58

Anyone uses a HP ipaq and can give me tips where it is best fitted, I want to find the right place, because i use it as a navigator.
Tips will be welcome, what kind of clip to use where to get it and so on

Klaas
NHB 1.8 sport delivered march

t0ny0k · 11th February 2007, 10:42

I had the same problem. The best solution I found was to purchase a magnet type holder from Carphone warehouse. Place the magnet between the VSA and mph/km buttons and you get a metal strip to fit to te back of your IPAQ. You are able to view the navigator thru te steering wheel. It does not block the instrument panel at all,even with the navigator in landscape mode. Maybe a bit tight if you wat the charger connected. I plan to put a holder in the boot to charge the ipaq if I need to. I have also purchased a cigerette lighter holder from Maplins to wire an extra socket in as per one of the modification threads posted on the forum. If you would like some photographs I will try to assist. The ipaq is easilly viewed and easy to touch

klaasbakker99 · 11th February 2007, 10:53

Foto's might come handy.
At the site of Kuda.de you find some handy solutions.
Try this link http://www.kuda-phonebase.de/dynpics/246245_G.jpg

t0ny0k · 11th February 2007, 13:33

Sorry for the quality,hope they are helpful. Also use it for my mobile phone.

10th February 2007, 23:58	#1 (permalink)
klaasbakker99 Valve Cap Join Date: 6th February 2007 Location: netherlands Posts: 43 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	ipaq - mounting? Anyone uses a HP ipaq and can give me tips where it is best fitted, I want to find the right place, because i use it as a navigator. Tips will be welcome, what kind of clip to use where to get it and so on Klaas NHB 1.8 sport delivered march

11th February 2007, 10:53	#3 (permalink)
klaasbakker99 Valve Cap Join Date: 6th February 2007 Location: netherlands Posts: 43 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	ipaq Foto's might come handy. At the site of Kuda.de you find some handy solutions. Try this link http://www.kuda-phonebase.de/dynpics/246245_G.jpg Last edited by klaasbakker99; 11th February 2007 at 11:10. Reason: find new solution

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads for: ipaq - mounting?
Thread	Thread Starter	Forum	Replies	Last Post
Phone ipaq hw6915	Milano_Jon	Electronics	0	10th September 2007 15:30
Mounts Tom Tom Go Mounting	NathanB	Electronics	6	15th April 2007 22:06
Mounting Solutions for PDA's, Removable Sat Nav Systems etc	klaasbakker99	Wiki Article Discussion	0	26th February 2007 22:18
Safety Cameras Snooper Syrius Mounting???	tonyt	Electronics	2	29th January 2007 07:15
AUX in Mounting/charging solutions for GSM/PDA/IPOD ..... @ civic EU 06	ghosty_boy	Ipods, MP3 Players and ICE	17	11th November 2006 16:46


This thread is about: ipaq - mounting?, it's in Electronics at the Honda Civic forum Civinfo; Anyone uses a HP ipaq and can give me tips where it is best fitted, I want to find the right place, because i use ...

11th February 2007, 10:42	#2 (permalink)
t0ny0k Valve Cap Join Date: 8th December 2006 Location: South Wales Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	I had the same problem. The best solution I found was to purchase a magnet type holder from Carphone warehouse. Place the magnet between the VSA and mph/km buttons and you get a metal strip to fit to te back of your IPAQ. You are able to view the navigator thru te steering wheel. It does not block the instrument panel at all,even with the navigator in landscape mode. Maybe a bit tight if you wat the charger connected. I plan to put a holder in the boot to charge the ipaq if I need to. I have also purchased a cigerette lighter holder from Maplins to wire an extra socket in as per one of the modification threads posted on the forum. If you would like some photographs I will try to assist. The ipaq is easilly viewed and easy to touch