Electrics Aftermarket Switches

pReDaToR · 4th September 2012, 18:56

Hi folks,

Been letting my wee mind run around with ideas for internal electrics. Plan to start off with some lighting, and wanting a switch override.

Been looking around the net and found PLENTY of switches to choose from. Its hard to imagine them on the car though, and don't want them to look too out of place.

Locations:
The only sensible locations I can come up with is the 2 blanks where the heated seat switches are...next to the lighter socket.

I was thinking that maybe getting a hold of a pair of the heated switches and somehow getting the labelling off might be the best bet. However knowing Honda those switches will cost a bit

I'm def needing some inspiration and advice on switches that would suit the car. Any pics from members who have switches here(or anywhere else) would be much appreciated as well.

Grayfox · 4th September 2012, 23:14

I was thinking of this but the issue is the heater switches are 3 way.

Lo-OFF-Hi and not just On or OFF.

higham · 4th September 2012, 23:38

try a company called rs components

ScottM · 5th September 2012, 06:40

Quote:

Originally Posted by higham

try a company called rs components

Hope he has a few hours to spare!

Excellent selection but as there are so many options it can be difficult to find what you are looking for.

pReDaToR · 5th September 2012, 07:07

Yeh I've seen every kind of switch tht man has ever made!

I just don't want to pick one, and then later find out it looks stupid on the car when I fit it.

If anyone can share any experiences/suggestions I would appreciate it.

Yassian · 5th September 2012, 07:21

Was thinking of doing something similar my self, but the car is still under warranty, and I'm not brave enough to void it yet. These are switches that I found best suited till now:

Black Metal push button LED Switch Momentary | eBay

LED Iluminated rocker switch CAR RED GREEN AMBER BLUE | eBay

Syx · 5th September 2012, 09:05

Do you use the cubby under the stereo for anything? I would potentially fit a plate in there where you can mount your switches, and also means you can close the cubby and maintain the OEM look afterwards!

pReDaToR · 5th September 2012, 13:25

Quote:

Originally Posted by Yassian

Was thinking of doing something similar my self, but the car is still under warranty, and I'm not brave enough to void it yet. These are switches that I found best suited till now:

Black Metal push button LED Switch Momentary | eBay

LED Iluminated rocker switch CAR RED GREEN AMBER BLUE | eBay

I like the rocker switches...they don't look to flashy. Im being a bit anal about it, buy my only concern I have is that the switches don't match the trim colour, or close to it. Might be worth buying a set to trial out. If not I'm sure I'll find a use for them elsehwere.

Quote:

Originally Posted by Syx

Do you use the cubby under the stereo for anything? I would potentially fit a plate in there where you can mount your switches, and also means you can close the cubby and maintain the OEM look afterwards!

I sort of use it for sunglasses, but thats about it really. Im not one for hoarding in the car.

I love the idea mate! I'll def have a think about this as a possibility. Do you know anyone that has this already?

Syx · 5th September 2012, 14:31

Quote:

Originally Posted by pReDaToR

I sort of use it for sunglasses, but thats about it really. Im not one for hoarding in the car.

I love the idea mate! I'll def have a think about this as a possibility. Do you know anyone that has this already?

I don't unfortunately, but it certainly can't be too difficult to do.

RobertUtley · 5th September 2012, 15:07

Quote:

Originally Posted by Syx

I don't unfortunately, but it certainly can't be too difficult to do.

syz go and do one for fun this really is your forte

Bog · 5th September 2012, 15:38

I mounted switches here...

I got them from maplin and are quite discrete and imo look oem

RobertUtley · 5th September 2012, 15:56

Quote:

Originally Posted by Bog

I mounted switches here...

I got them from maplin and are quite discrete and imo look oem

Come and fit me them i dont care what to operate they are just mad cool!

Bog · 5th September 2012, 15:58

Lol... they actually looked better in real life too

Was for my video box and TV, but anyone looking prob thought they were for the seat..

Switches are £2 ish in any Maplin store. I just removed the 4 screws holding the arm rest down, lifted it up slightly and drilled the 3 holes (15mm).... took approx 15 mins.

pReDaToR · 9th September 2012, 09:22

Quote:

Originally Posted by Bog

I mounted switches here...

I got them from maplin and are quite discrete and imo look oem

I like that for an idea as well mate. Really discreet.

MrBozo · 9th September 2012, 18:10

I replaced my cig lighter socket for an LED Metal Push Button for my Video Changer.

For Sale: Control Box for Video In/Reversing Camera

firstcivic · 9th September 2012, 20:09

i like syx's idea,depending on the switch you picked for that panel you would kinda have a rally style effect ****

markvirgo · 9th September 2012, 21:13

All you need is one of these Slim Rocker Switches : Rocker Switches : Maplin Electronics

plain black non illuminated.
I have one for the footwell lights and one for bogs V3 box.

They blend in well and don't look out of place

pReDaToR · 11th September 2012, 15:58

Quote:

Originally Posted by MrBozo

I replaced my cig lighter socket for an LED Metal Push Button for my Video Changer.

For Sale: Control Box for Video In/Reversing Camera

Im liking this one as well bozo...a one shot deal obv as theres only room for 1 switch but a very inventive use of the socket.

4th September 2012, 18:56	#1 (permalink)
pReDaToR Stuart Car: 025/200 Join Date: 5th June 2012 Location: West Lothian Posts: 550 Thanks given: 312 Thanked 111 Times in 108 Posts iTrader: (3)	Aftermarket Switches Hi folks, Been letting my wee mind run around with ideas for internal electrics. Plan to start off with some lighting, and wanting a switch override. Been looking around the net and found PLENTY of switches to choose from. Its hard to imagine them on the car though, and don't want them to look too out of place. Locations: The only sensible locations I can come up with is the 2 blanks where the heated seat switches are...next to the lighter socket. I was thinking that maybe getting a hold of a pair of the heated switches and somehow getting the labelling off might be the best bet. However knowing Honda those switches will cost a bit I'm def needing some inspiration and advice on switches that would suit the car. Any pics from members who have switches here(or anywhere else) would be much appreciated as well.

5th September 2012, 15:58	#13 (permalink)
Bog Supporter Car: 2012 Silver 1.8 EX-GT Join Date: 5th October 2006 Location: Radlett, Hertfordshire Posts: 4,373 Thanks given: 119 Thanked 422 Times in 362 Posts iTrader: (26)	Lol... they actually looked better in real life too Was for my video box and TV, but anyone looking prob thought they were for the seat.. Switches are £2 ish in any Maplin store. I just removed the 4 screws holding the arm rest down, lifted it up slightly and drilled the 3 holes (15mm).... took approx 15 mins. Last edited by Bog; 5th September 2012 at 16:02.

Similar Threads for: Aftermarket Switches
Thread	Thread Starter	Forum	Replies	Last Post
Electrics Window switches	padster	Electronics	2	11th August 2012 18:18
Toggle Switches	Unknownsoldier	Modification Projects	5	17th December 2011 14:11
If I get spare switches for the heated seats switches would anyone be interested?	jraward	Group Buys	2	2nd January 2010 14:52
What else switches on the radio	unciepaul	General Discussion	4	18th July 2008 21:59
Other Illuminated Switches	Fun4Four	Electronics	2	31st January 2007 21:32

4th September 2012, 23:14	#2 (permalink)
Grayfox Most Active Australian Car: 2010 Black Civic Si FK2 Join Date: 1st February 2012 Location: NSW, Australia Posts: 3,189 Thanks given: 69 Thanked 297 Times in 282 Posts iTrader: (0)	I was thinking of this but the issue is the heater switches are 3 way. Lo-OFF-Hi and not just On or OFF.

4th September 2012, 23:38	#3 (permalink)
higham Car: 57 CTR GT, NHB Join Date: 2nd August 2009 Location: manchester uk Posts: 3,489 Thanks given: 139 Thanked 306 Times in 292 Posts iTrader: (0)	try a company called rs components

5th September 2012, 07:07	#5 (permalink)
pReDaToR Stuart Thread starter Car: 025/200 Join Date: 5th June 2012 Location: West Lothian Posts: 550 Thanks given: 312 Thanked 111 Times in 108 Posts iTrader: (3)	Yeh I've seen every kind of switch tht man has ever made! I just don't want to pick one, and then later find out it looks stupid on the car when I fit it. If anyone can share any experiences/suggestions I would appreciate it.

5th September 2012, 07:21	#6 (permalink)
Yassian ivtec just kicked out,YO! Car: 2011 FK2 Milano red Join Date: 27th January 2011 Location: Croatia Posts: 974 Thanks given: 128 Thanked 154 Times in 150 Posts iTrader: (1)	Was thinking of doing something similar my self, but the car is still under warranty, and I'm not brave enough to void it yet. These are switches that I found best suited till now: Black Metal push button LED Switch Momentary \| eBay LED Iluminated rocker switch CAR RED GREEN AMBER BLUE \| eBay

5th September 2012, 09:05	#7 (permalink)
Syx Clingfilmed Car: 2008 2.2 CTS GT Join Date: 22nd December 2009 Location: Luton, UK Posts: 9,617 Thanks given: 927 Thanked 1,763 Times in 1,538 Posts iTrader: (44)	Do you use the cubby under the stereo for anything? I would potentially fit a plate in there where you can mount your switches, and also means you can close the cubby and maintain the OEM look afterwards!

5th September 2012, 15:38	#11 (permalink)
Bog Supporter Car: 2012 Silver 1.8 EX-GT Join Date: 5th October 2006 Location: Radlett, Hertfordshire Posts: 4,373 Thanks given: 119 Thanked 422 Times in 362 Posts iTrader: (26)	I mounted switches here... I got them from maplin and are quite discrete and imo look oem

9th September 2012, 18:10	#15 (permalink)
MrBozo Foldy Mirror Mods,Cameras Car: 2007 2.2 EX, NHB Join Date: 10th May 2010 Location: West Lothian Posts: 2,931 Thanks given: 573 Thanked 265 Times in 255 Posts iTrader: (172)	I replaced my cig lighter socket for an LED Metal Push Button for my Video Changer. For Sale: Control Box for Video In/Reversing Camera

9th September 2012, 20:09	#16 (permalink)
firstcivic Supporter Car: 08 2.2 nhb type s gt Join Date: 21st May 2012 Location: Ireland Posts: 639 Thanks given: 135 Thanked 89 Times in 83 Posts iTrader: (0)	i like syx's idea,depending on the switch you picked for that panel you would kinda have a rally style effect ****

9th September 2012, 21:13	#17 (permalink)
markvirgo Type EX,A guy called Mark Car: 2006 1.8, Alabaster Silver Join Date: 22nd June 2007 Location: Northamptonshire Posts: 2,002 Thanks given: 98 Thanked 333 Times in 285 Posts iTrader: (11)	All you need is one of these Slim Rocker Switches : Rocker Switches : Maplin Electronics plain black non illuminated. I have one for the footwell lights and one for bogs V3 box. They blend in well and don't look out of place