Who wants a flip key? - Page 19

XCGuard · 7th February 2008, 15:03

Quote:

Originally Posted by Stef

I work with Chinese every day
It will take a while to make all the moulds (plastic parts, metal parts, stickers..)
The test runs, corrections...

Who will pay for the moulds? My estimation they will cost about 3000€ and they need payment in advance!

So it could take a while. 3 - 6mnth

Anyhow the transponder MUST be moved to the front of the key, there is NO other way.

I hope you are wrong about the 3-6 months! They are shut this week for their new year. We will have to see what they come up with mid Feb as they promised.
If you read my posts towards the start of this thread you will note I was willing to pay for the moulding from my pocket as long as there was enough interest from people wanting to buy it, which was why I started the poll.
They are a major manufacturer of all sorts of alarms and car electrical components including remotes and flip keys so I should think they know what they are talking about.

Time will tell whether your estimation of the timescales are right, but I hope they can produce quicker than that.

Naasir.

Stef · 7th February 2008, 16:52

My estimate is based on "if they start now" I have no idea what stage they are in.
Like I wrote, I produce in far east China and TW. If somebody there can concentrate only on this project, it could go a bit faster... Hope so.

Stef · 7th February 2008, 16:58

Quote:

Originally Posted by Robbieee

I am confused

Are you building a flip key too stef?

Nop, Just tested the Ebay one, and shared my experience with producing in Far East.
HONDA SWITCHBLADE REMOTE KEY CONVERSION CASE 2 BUTTON on eBay, also, Honda, Car Parts, Cars, Parts Vehicles (end time 13-Feb-08 06:27:22 GMT)

Robbieee · 7th February 2008, 20:23

Quote:

Originally Posted by Stef

Nop, Just tested the Ebay one, and shared my experience with producing in Far East.
HONDA SWITCHBLADE REMOTE KEY CONVERSION CASE 2 BUTTON on eBay, also, Honda, Car Parts, Cars, Parts Vehicles (end time 13-Feb-08 06:27:22 GMT)

Oh right sorry, thought u were building one too hehe.

Quote:

I hope you are wrong about the 3-6 months! They are shut this week for their new year. We will have to see what they come up with mid Feb as they promised.
If you read my posts towards the start of this thread you will note I was willing to pay for the moulding from my pocket as long as there was enough interest from people wanting to buy it, which was why I started the poll.
They are a major manufacturer of all sorts of alarms and car electrical components including remotes and flip keys so I should think they know what they are talking about.

Time will tell whether your estimation of the timescales are right, but I hope they can produce quicker than that.

Naasir.

What size will the bently one be? same as the ebay one?

FWH · 9th February 2008, 13:36

Quote:

Originally Posted by XCGuard

I hope you are wrong about the 3-6 months! They are shut this week for their new year. We will have to see what they come up with mid Feb as they promised.

I have had some tools made faster, down to 3-4 weeks to first sample from approved print.

But usually it is 3-6 months from approved print to first production run.

Not always certain the first sample is correct.

I have also been wondering about the up front tooling costs in this project.

Dimplyred · 9th February 2008, 15:10

Quote:

Originally Posted by FWH

I have had some tools made faster, down to 3-4 weeks to first sample from approved print.

But usually it is 3-6 months from approved print to first production run.

Not always certain the first sample is correct.

I have also been wondering about the up front tooling costs in this project.

Me too they are not cheap..

woody2k4 · 10th February 2008, 13:21

Hi all, i've not been on for a while to check this thread, What the progress?

XCGuard · 10th February 2008, 17:43

Quote:

Originally Posted by woody2k4

Hi all, i've not been on for a while to check this thread, What the progress?

The firm was shut this week for the Chinese new year, reopening Tomorrow or Tuesday. Should finish designing it and hopefully produce an actual key by the end of coming week.

For those that are worried about who is going to pay for production of this key; it will be me, as I said towards the start of this thread. Aslong as 150-180 keys sell then the process will pay for itself. Going by the amount of interest this figure should be easily reached.

360° · 13th February 2008, 11:10

put me down for 2 as well, if your willing to ship to switzerland.

ante00 · 13th February 2008, 12:49

any news XCGuard?

apapageo · 13th February 2008, 13:22

I'd take 2 definitly

dudesterlang · 13th February 2008, 21:02

Count me in. But I don't understand how you would get our keys to be converted other than sending them in the post or is it a DIY affair. Call me a sceptic but I wouldn't be too keen on sending my car key in the post for someone to mess with. I will vote yes on your survey but it's gotta be a safe option.

I half expected to get a sheath to strap to my belt to keep my key in.

Jack The Lad. · 13th February 2008, 21:25

If it happens, it will be a case of removing the inner gizmo from your existing key and installing it in the flip key.
You will then need to take it to your local keycutter to copy it from your existing key.
You won't loose site of it mate.

Stef · 14th February 2008, 11:55

Quote:

Originally Posted by Jack The Lad.

If it happens, it will be a case of removing the inner gizmo from your existing key and installing it in the flip key.
You will then need to take it to your local keycutter to copy it from your existing key.
You won't loose site of it mate.

Forget it:
There is a 99% chance that the transponder must be removed from the original board. This requires some special skills and tools.

Stef · 14th February 2008, 12:04

There is also hope that new Honda cars will come with flip keys, so an original upgrade could be possible...
see:

RDX flip key - 8th Generation Honda Civic Forum

charlas · 14th February 2008, 12:32

Hmm, I wonder if our keys could have the 'Panic' button that the American market has activated? the solder pads are there for the switch? (if you look above, it's the 4 solder point's right on the bottom of the transponder PCB) as you can see from the below shot

babyjoe · 14th February 2008, 12:51

What does a panic button do?

charlas · 14th February 2008, 12:54

In the African/American markets it's common, it set's off the alarm after pressing it for a few moment's.

For people in car parks etc that get mugged/attacked whatnot.

Stef · 14th February 2008, 16:28

I tested this "hidden" panic putton with my previous car (CRV) but it did not work.
Probably not implemented in the car software.
Did not test it yet with the Civic.

charlas · 14th February 2008, 16:54

Quote:

Originally Posted by Stef

I tested this "hidden" panic putton with my previous car (CRV) but it did not work.
Probably not implemented in the car software.
Did not test it yet with the Civic.

I shall have a play tonight then

`

View Poll Results: Are you interested in purchasing a flip key?
Yes, and I am willing to pay upto £15 for one.	1,012	89.96%
No, I am happy to live with the key I have.	113	10.04%
Voters: 1125. You may not vote on this poll \| Withdraw Vote

14th February 2008, 12:32	#376 (permalink)
charlas i-VTEC Junkie Join Date: 29th January 2008 Location: Leics/Warwick Posts: 179 Thanks: 0 Thanked 4 Times in 4 Posts iTrader: (0)	Hmm, I wonder if our keys could have the 'Panic' button that the American market has activated? the solder pads are there for the switch? (if you look above, it's the 4 solder point's right on the bottom of the transponder PCB) as you can see from the below shot Last edited by charlas; 14th February 2008 at 12:47.

LinkBacks (?) LinkBack to this Thread: http://www.civinfo.com/forum/general-discussion/10803-wants-flip-key.html
Posted By	For	Type	Date
Llave retractil para Honda en Ebay - Club HondaSpirit - Página 11,5	This thread	Refback	12th August 2010 22:14
S2000 Forums -> Flip key option that works? : S2KI	This thread	Refback	3rd June 2010 13:59
www.clubhondacivic.com - Ver Tema - LLAVE PEGABLE + info + FOTOS (Brico p31)	This thread	Refback	3rd June 2010 13:58
Honda Flip Key	This thread	Refback	31st May 2010 17:10
Llave retractil para Honda en Ebay - Club HondaSpirit - Página 12,5	This thread	Refback	16th April 2010 15:43
RDX flip key - Page 30 - 8th Generation Honda Civic Forum	This thread	Refback	20th January 2010 17:37
RDX flip key - Page 29 - 8th Generation Honda Civic Forum	This thread	Refback	5th September 2009 05:28
S2KI - S2000 Forums -> Flip key option that works?	This thread	Refback	9th July 2009 07:59
S2000 Forums -> Flip key option that works?	This thread	Refback	5th November 2008 01:38
RDX flip key - Page 27 - 8th Generation Honda Civic Forum	This thread	Refback	13th October 2008 11:28
RDX flip key - Page 26 - 8th Generation Honda Civic Forum	This thread	Refback	20th September 2008 05:57
anybody interested in flip key ? - HondaCivicForum.com	This thread	Refback	19th August 2008 05:11
Chaveiro Canivete - Adaptação para o New Civic	This thread	Refback	19th August 2008 00:22
Flip Key Civic si altele - Page 5 - Hondafan	Post #0	Refback	17th August 2008 19:23
Forums CivicYume • Afficher le sujet - Aimeriez-vous une clef de contact pliable ou rétractable?	This thread	Refback	14th July 2008 17:34
Honda Flip Key - Page 2 - Ozhonda Forums	This thread	Refback	11th May 2008 01:02
RDX flip key - Page 17 - 8th Generation Honda Civic Forum	This thread	Refback	10th May 2008 22:39
Forums CivicYume :: Voir le sujet - une cl...typ ?	This thread	Refback	6th May 2008 10:28
Llave retractil para Honda en Ebay - Club HondaSpirit	This thread	Refback	15th March 2008 15:05
www.clubhondacivic.com :: Ver tema - LLAVE PEGABLE para el Civic + info + FOTOS	This thread	Refback	13th March 2008 17:03
anybody interested in flip key ?	This thread	Refback	1st March 2008 03:03
www.clubhondacivic.com :: Ver tema - Llaves tipo espadín	This thread	Refback	5th February 2008 08:45

Similar Threads for: Who wants a flip key?
Thread	Thread Starter	Forum	Replies	Last Post
Alarm Flip Keys	pekwah1	Electronics	19	15th July 2007 23:53

7th February 2008, 16:52	#362 (permalink)
Stef Supporter Car: 2006 Civic EX Join Date: 14th October 2006 Location: Belgium Posts: 777 Thanks: 28 Thanked 49 Times in 27 Posts iTrader: (0)	My estimate is based on "if they start now" I have no idea what stage they are in. Like I wrote, I produce in far east China and TW. If somebody there can concentrate only on this project, it could go a bit faster... Hope so.

10th February 2008, 13:21	#367 (permalink)
woody2k4 Supporter Join Date: 10th December 2007 Location: Essex Posts: 272 Thanks: 5 Thanked 0 Times in 0 Posts iTrader: (0)	Hi all, i've not been on for a while to check this thread, What the progress?

13th February 2008, 11:10	#369 (permalink)
360° Join Date: 20th February 2007 Location: Switzerland Posts: 31 Thanks: 1 Thanked 1 Time in 1 Post iTrader: (0)	put me down for 2 as well, if your willing to ship to switzerland.

13th February 2008, 12:49	#370 (permalink)
ante00 Supporter Car: 2007 1.8 Sport MT (Vivid) Join Date: 18th April 2007 Location: Zagreb, Croatia Posts: 829 Thanks: 16 Thanked 44 Times in 43 Posts iTrader: (0)	any news XCGuard?

13th February 2008, 13:22	#371 (permalink)
apapageo Join Date: 10th July 2007 Posts: 23 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	I'd take 2 definitly

13th February 2008, 21:02	#372 (permalink)
dudesterlang Join Date: 13th February 2008 Location: Leeds Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	Count me in. But I don't understand how you would get our keys to be converted other than sending them in the post or is it a DIY affair. Call me a sceptic but I wouldn't be too keen on sending my car key in the post for someone to mess with. I will vote yes on your survey but it's gotta be a safe option. I half expected to get a sheath to strap to my belt to keep my key in.

13th February 2008, 21:25	#373 (permalink)
Jack The Lad. Supporter Join Date: 28th August 2007 Location: ENGLAND Posts: 3,008 Thanks: 16 Thanked 101 Times in 101 Posts iTrader: (0)	If it happens, it will be a case of removing the inner gizmo from your existing key and installing it in the flip key. You will then need to take it to your local keycutter to copy it from your existing key. You won't loose site of it mate.

14th February 2008, 12:04	#375 (permalink)
Stef Supporter Car: 2006 Civic EX Join Date: 14th October 2006 Location: Belgium Posts: 777 Thanks: 28 Thanked 49 Times in 27 Posts iTrader: (0)	There is also hope that new Honda cars will come with flip keys, so an original upgrade could be possible... see: RDX flip key - 8th Generation Honda Civic Forum

14th February 2008, 12:51	#377 (permalink)
babyjoe Join Date: 1st November 2006 Location: Belgium Posts: 129 Thanks: 3 Thanked 1 Time in 1 Post iTrader: (0)	What does a panic button do?

14th February 2008, 12:54	#378 (permalink)
charlas i-VTEC Junkie Join Date: 29th January 2008 Location: Leics/Warwick Posts: 179 Thanks: 0 Thanked 4 Times in 4 Posts iTrader: (0)	In the African/American markets it's common, it set's off the alarm after pressing it for a few moment's. For people in car parks etc that get mugged/attacked whatnot.

14th February 2008, 16:28	#379 (permalink)
Stef Supporter Car: 2006 Civic EX Join Date: 14th October 2006 Location: Belgium Posts: 777 Thanks: 28 Thanked 49 Times in 27 Posts iTrader: (0)	I tested this "hidden" panic putton with my previous car (CRV) but it did not work. Probably not implemented in the car software. Did not test it yet with the Civic.