[Fog] fog light covers made & fitted - Page 5

Miggins · 22nd January 2007, 22:21

Quote:

Originally Posted by damianscott71

So, in the meantime, I'll re-lense the fogs in 4mm hard coated polycarbonate.

Hello Damian,
Did you manage to get any pics before you re- manufacture?

damianscott71 · 22nd January 2007, 23:23

Hi Miggins, I took some pics of the smashed fogs, they're on Pottsy's thread regarding the subject. I'll take some pics when the fogs are out too..... If I get to do them before the dealer does!

Damian

p.s.

If anybody needs 2mm polycarbonate to make a cover, I can supply a strip big enough to make about 6 covers for £10 plus postage, along with a pattern for you to cut out.

Polycarbonate sheeting can be cut using a handsaw, jigsaw, hacksaw, possibly even tin snips at low thicknesses. Rough edges can be dry sanded and clean edges can be wet sanded to improve the finish.

PM me if you're interested.

Egelundsvej · 23rd January 2007, 18:28

Hi Mark,

Lousy weather in Denmark these past few day but have now managed to fit fog light covers, so am now looking forward to unsmashed foglights for the foreseeable future. Great, thanks a load. If I've got it right

, there should be pics attached.

gray52 · 23rd January 2007, 19:11

yes you got it right, nice set of pics there. milano red the same as mine, spent a few hours cleaning mine at the weekend and was well worth it.

glad you like the covers.

Glass Spider · 23rd January 2007, 21:29

the covers look nice on the red

IWANTACIVIC · 24th January 2007, 06:20

thanks got covers in the mail just got to fit them hopefully ill get time later. well done **

M88RKE · 24th January 2007, 12:18

gray52

No problem with creating my own templates, i'll sort it over the weekend. Its just that you had some already that were perfectly sized and clearly did the trick. I am of the nature of if someone already has a solution then why reinvent the wheel...

Thanks for the idea anyway.

Regards

okehciv · 24th January 2007, 14:03

Hi Grey 52,are you still doing covers,if so would be very interested in getting a pair.

gray52 · 24th January 2007, 14:50

ive run out of covers at the moment. should get some more made at the weekend, so will post when i have more and pm the people who have already asked for some and they will get the 1st offer of the new stock.

okehciv · 25th January 2007, 03:52

Gray 52
Thanks for that,shame didn't have any, was in P.boro last night.

gray52 · 28th January 2007, 16:44

fog light covers are back in stock but only 7 pairs. pm me.

flyboy · 28th January 2007, 19:27

Count me in for a pair if you start to produce them!

okehciv · 30th January 2007, 17:28

Hi Gray52,covers arrived this morning thanks,will fit tommorow when I get in from work cheers

gray52 · 30th January 2007, 19:10

dont forget to post some pics, you are now 1 of an elite club, but it is growing.

okehciv · 31st January 2007, 05:33

Pics will have to posted at weekend methinks,dark in morn and dark when boss gets home with the spaceship,dont think flash will do it justice

okehciv · 6th February 2007, 10:39

At last managed to to post pics of the covers,am well pleased with them Car was a bit mucky when taken, but you get the idea.

PTR · 12th February 2007, 19:28

hi gray52,

just recived covers today! thx! good stuff!

gonna get my car this or next week so... gonna mount them immediately!
I will post some pics!

Brodick · 12th February 2007, 20:33

Have Honda improved the fog lights??
haven't heard many folks having any problems just recently !!

Glass Spider · 12th February 2007, 20:41

thats because weve all got the covers on now, lol

Brodick · 12th February 2007, 21:55

Quote:

Originally Posted by Glass Spider

thats because weve all got the covers on now, lol

aye right GS

- but really There doesn't seem to have been so many
issues with them recently

12th February 2007, 19:28	#97 (permalink)
PTR Magic Rear Seat Join Date: 4th October 2006 Location: Hungary Posts: 667	covers recived! hi gray52, just recived covers today! thx! good stuff! gonna get my car this or next week so... gonna mount them immediately! I will post some pics!

LinkBacks (?) LinkBack to this Thread: http://www.civinfo.com/forum/lights/2802-fog-fog-light-covers-made-fitted.html
Posted By	For	Type	Date
Broken Fog Light - Type R Owners Forums	This thread	Refback	19th April 2008 22:17
Nebelscheinwerfer a'la Honda.... : Honda Civic FK, FN, FD	This thread	Pingback	11th March 2008 07:57
Fendinebbia scoppiato - Luci	This thread	Refback	16th January 2008 20:43
Honda Performance Club - Forum	This thread	Refback	26th December 2007 05:58
www.clubhondacivic.com :: Ver tema - [BRICO] - Proteger Los Antinieblas Delanteros	This thread	Refback	21st November 2007 18:43

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads for: [Fog] fog light covers made & fitted
Thread	Thread Starter	Forum	Replies	Last Post
Floods and Fog Light Covers	Guinness	Lights	6	31st March 2008 15:21
Seat Covers	neilfs	Transform Leather	11	12th November 2007 19:24
Diy Fog Light Covers	Ramsay	Lights	17	26th October 2007 14:55
My Bronze Type S with Spoiler, Colour Coded and Fog light covers	whizzy	Gallery	6	8th August 2007 06:39
fog lamp covers	v001148	Lights	13	13th December 2006 19:44


This thread is about: [Fog] fog light covers made & fitted, it's in Lights at the Honda Civic forum Civinfo; Originally Posted by damianscott71 So, in the meantime, I'll re-lense the fogs in 4mm hard coated polycarbonate. Hello Damian, Did you manage to ...

22nd January 2007, 23:23	#82 (permalink)
damianscott71 Diesel Demon Triangular Exhaust Join Date: 1st July 2006 Location: Kempston, Bedfordshire Posts: 320	Hi Miggins, I took some pics of the smashed fogs, they're on Pottsy's thread regarding the subject. I'll take some pics when the fogs are out too..... If I get to do them before the dealer does! Damian p.s. If anybody needs 2mm polycarbonate to make a cover, I can supply a strip big enough to make about 6 covers for £10 plus postage, along with a pattern for you to cut out. Polycarbonate sheeting can be cut using a handsaw, jigsaw, hacksaw, possibly even tin snips at low thicknesses. Rough edges can be dry sanded and clean edges can be wet sanded to improve the finish. PM me if you're interested.

23rd January 2007, 19:11	#84 (permalink)
gray52 Supporter Magic Rear Seat Join Date: 23rd November 2006 Location: peterborough Posts: 798	yes you got it right, nice set of pics there. milano red the same as mine, spent a few hours cleaning mine at the weekend and was well worth it. glad you like the covers.

23rd January 2007, 21:29	#85 (permalink)
Glass Spider Supporter Triangular Exhaust Join Date: 15th June 2006 Location: London Posts: 300	the covers look nice on the red

24th January 2007, 06:20	#86 (permalink)
IWANTACIVIC Supporter Magic Rear Seat Join Date: 15th September 2006 Location: LINCS UK Posts: 659	thanks got covers in the mail just got to fit them hopefully ill get time later. well done **

24th January 2007, 12:18	#87 (permalink)
M88RKE Valve Cap Join Date: 3rd January 2007 Posts: 29	gray52 No problem with creating my own templates, i'll sort it over the weekend. Its just that you had some already that were perfectly sized and clearly did the trick. I am of the nature of if someone already has a solution then why reinvent the wheel... Thanks for the idea anyway. Regards

24th January 2007, 14:03	#88 (permalink)
okehciv Supporter Magic Rear Seat Join Date: 21st January 2007 Location: shaw gtr manchester Posts: 796	Hi Grey 52,are you still doing covers,if so would be very interested in getting a pair.

24th January 2007, 14:50	#89 (permalink)
gray52 Supporter Magic Rear Seat Join Date: 23rd November 2006 Location: peterborough Posts: 798	ive run out of covers at the moment. should get some more made at the weekend, so will post when i have more and pm the people who have already asked for some and they will get the 1st offer of the new stock.

25th January 2007, 03:52	#90 (permalink)
okehciv Supporter Magic Rear Seat Join Date: 21st January 2007 Location: shaw gtr manchester Posts: 796	Gray 52 Thanks for that,shame didn't have any, was in P.boro last night.

28th January 2007, 16:44	#91 (permalink)
gray52 Supporter Magic Rear Seat Join Date: 23rd November 2006 Location: peterborough Posts: 798	fog light covers are back in stock but only 7 pairs. pm me.

Remove Advertisements Sponsored Links
Civinfo Advertisement

28th January 2007, 19:27	#92 (permalink)
flyboy Valve Cap Join Date: 28th January 2007 Posts: 18	Count me in for a pair if you start to produce them!

30th January 2007, 17:28	#93 (permalink)
okehciv Supporter Magic Rear Seat Join Date: 21st January 2007 Location: shaw gtr manchester Posts: 796	Hi Gray52,covers arrived this morning thanks,will fit tommorow when I get in from work cheers

30th January 2007, 19:10	#94 (permalink)
gray52 Supporter Magic Rear Seat Join Date: 23rd November 2006 Location: peterborough Posts: 798	dont forget to post some pics, you are now 1 of an elite club, but it is growing.

31st January 2007, 05:33	#95 (permalink)
okehciv Supporter Magic Rear Seat Join Date: 21st January 2007 Location: shaw gtr manchester Posts: 796	Pics will have to posted at weekend methinks,dark in morn and dark when boss gets home with the spaceship,dont think flash will do it justice

12th February 2007, 20:33	#98 (permalink)
Brodick Perfect Guy! Rocketship door handle Join Date: 1st December 2006 Location: Central Scotland Posts: 1,581	Have Honda improved the fog lights?? haven't heard many folks having any problems just recently !!

12th February 2007, 20:41	#99 (permalink)
Glass Spider Supporter Triangular Exhaust Join Date: 15th June 2006 Location: London Posts: 300	thats because weve all got the covers on now, lol