HKS exhaust system

NEEMSTAR · 19th March 2008, 13:23

picked straight from CTRO forum for anyone interested

" At last after a long long wait XO are proud to be the first to fit the all new HKS exhaust system for the Civic Type R FN2.

Dyno proven results are

STD 170.5 bhp ATW

AEM Short Ram and HKS Exhaust 178.6bhp ATW

Torque is also up by 25.7

Dyno graphs will follow shortly.

price has just been released officially today at £595+vat (not bad at all). General release is not for another couple of weeks, so pre-book to avoid dissapointment.

http://www.xopowertuning.co.uk " Terry

666 · 19th March 2008, 15:49

That looks superb. I like the round tailpipes.

BRM · 19th March 2008, 22:58

Cant wait to hear how it sounds.

Still prefer the original tailpipes tho, hope they have that option!!

NEEMSTAR · 19th March 2008, 23:10

the original tailpipes are round too

yea i would like to hear it aswell - to compare it with the miltek zorst

Andiww · 19th March 2008, 23:15

How about putting it into the Type S 1.8? Do you know what effect would it give?

NEEMSTAR · 19th March 2008, 23:18

i don't know mate - contact the providers through the website

dragonglance · 19th March 2008, 23:39

i was just going to say about the type s too, althought i am going to see if i can egt insured with Adrian Flux as my current insurer will not let me modify my car till i am 25

lozhoon · 20th March 2008, 07:17

i think the new round pipe looks mint, love the hks surround. does the price include the aem kit? and how does it compare to the miltek?

lozza

Jeroen1000 · 20th March 2008, 07:45

170.5 bhp? Shouldn't that be 200? Or does this figure need converting

R-2 · 20th March 2008, 09:04

Quote:

Originally Posted by Jeroen1000

170.5 bhp? Shouldn't that be 200? Or does this figure need converting

No - it is 170.5 bhp as measured at the wheels

Still enjoying your 'R' Jeroen1000?

Jeroen1000 · 20th March 2008, 09:16

Quote:

Originally Posted by R-2

No - it is 170.5 bhp as measured at the wheels

Still enjoying your 'R' Jeroen1000?

Oh, those false advertisements... Haha yes, speeding is becoming a problem though. Unlike in the UK radar detectors are not allowed...

Krysten CTR · 20th March 2008, 23:50

Quote:

Originally Posted by Jeroen1000

170.5 bhp? Shouldn't that be 200? Or does this figure need converting

Pretty sure the 200bhp is based on the engine power without the ancillary items, ie water pump etc....

hlxbravo · 21st March 2008, 14:45

200bhp (or 201bhp to be precise) is the power measured at the flywheel, by the time it's driven all manner of things on the way, there is a percentage drop.

Rnosa · 29th April 2008, 19:53

Has anyone found a soundclip of the exhaust?

tdi-north · 3rd May 2008, 14:05

Quote:

Originally Posted by hlxbravo

200bhp (or 201bhp to be precise) is the power measured at the flywheel, by the time it's driven all manner of things on the way, there is a percentage drop.

Have yet to see an FN2 on our dyno make the quoted bhp.

They are all coming out at anything from 208-215bhp!
First one we had in was at a Civic RR day where cars were making stock 197 and around that. We put the FN2 on and it made 212bhp in 3 seperate runs.

Will post up pictures and results of the HKS tests soon.

Paul

tdi-north · 3rd May 2008, 14:10

HKS Exhaust kit

How good does this look!

This setup is totally road legal and on idle and low revs sounds as quiet as stock. Open it up and it has a nice raspy sound.
It made significant gains over the stock exhaust which is you look at it looks like its been driven over by a truck as its squashed in places and very restrictive at the exit pipes with some silly little baffles on the tailpipes.

When combined with a CAI and the Hondata reflash we saw a jump of 14bhp and 9ft/lb torque.

Just need the manifold to arrive now.

NEEMSTAR · 3rd May 2008, 14:25

the tail pipes and HKS surround looks cool

Level390 · 3rd May 2008, 14:51

The surround is a great idea. I'd love to see some more pics of the round pipes but not so close-up to get a better idea of how it looks.

philosoma · 3rd May 2008, 17:02

Yea some pics further back are needed. Very interested in this. Have the Hondata ECU on the way too. Damn you all for being so far away

Rnosa · 3rd May 2008, 19:13

This is starting to look real nice now. I am most certainly getting this done although I still have no idea what it sounds like. Still searching for a sound clip.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.civinfo.com/forum/type-r/12651-hks-exhaust-system.html
Posted By	For	Type	Date
ClubTypeR.org - Ver Tpico - Escape HKS para FN2	Post #0	Refback	19th September 2008 14:11
Eftermarknad för Civic FN2 - Honda Performance Club - Forum	This thread	Refback	28th August 2008 21:30
www.hondaclub.it • Leggi argomento - FN2 RACE	This thread	Refback	14th July 2008 17:29
HKS exhaust system for FN2 - HondaTech Australia Forums	Post #0	Refback	10th May 2008 12:14
Honda Performance Club - Forum	This thread	Refback	15th April 2008 08:31

Similar Threads for: HKS exhaust system
Thread	Thread Starter	Forum	Replies	Last Post
Exhaust Remus Exhaust	Mr Lovedog	Engines and Transmission	9	13th May 2008 09:58
Exhaust Exhaust rattle on 1.8 ex	Goo	Engines and Transmission	7	5th January 2008 14:54
Exhaust Exhaust question	Russell 10	Engines and Transmission	1	21st December 2007 08:36
Exhaust Exhaust trims?	Naresh	Engines and Transmission	29	25th July 2007 22:54
Exhaust Exhaust Garnish!	DanKo	Engines and Transmission	1	1st November 2006 23:45


This thread is about: HKS exhaust system, it's in Type-R at the Honda Civic forum Civinfo; picked straight from CTRO forum for anyone interested " At last after a long long wait XO are proud to be the first to fit ...

19th March 2008, 15:49	#2 (permalink)
666 Supporter Valve Cap Join Date: 7th February 2008 Location: St. Helens. Posts: 47 Thanks: 0 Thanked 1 Time in 1 Post iTrader: (0)	That looks superb. I like the round tailpipes.

19th March 2008, 22:58	#3 (permalink)
BRM Valve Cap Join Date: 2nd October 2007 Posts: 46 Thanks: 0 Thanked 1 Time in 1 Post iTrader: (0)	Cant wait to hear how it sounds. Still prefer the original tailpipes tho, hope they have that option!!

19th March 2008, 23:10	#4 (permalink)
NEEMSTAR Nobody gets out alive Rocketship door handle Join Date: 7th October 2007 Location: In your mind Posts: 1,359 Thanks: 30 Thanked 24 Times in 24 Posts iTrader: (0)	the original tailpipes are round too yea i would like to hear it aswell - to compare it with the miltek zorst

19th March 2008, 23:15	#5 (permalink)
Andiww Locking Wheelnut Join Date: 4th March 2008 Location: Poznan, Poland Posts: 109 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	How about putting it into the Type S 1.8? Do you know what effect would it give?

19th March 2008, 23:18	#6 (permalink)
NEEMSTAR Nobody gets out alive Rocketship door handle Join Date: 7th October 2007 Location: In your mind Posts: 1,359 Thanks: 30 Thanked 24 Times in 24 Posts iTrader: (0)	i don't know mate - contact the providers through the website

19th March 2008, 23:39	#7 (permalink)
dragonglance Supporter Triangular Exhaust Join Date: 23rd February 2008 Location: UK Posts: 210 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	i was just going to say about the type s too, althought i am going to see if i can egt insured with Adrian Flux as my current insurer will not let me modify my car till i am 25

20th March 2008, 07:17	#8 (permalink)
lozhoon Wheelnut Join Date: 22nd July 2007 Posts: 67 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	i think the new round pipe looks mint, love the hks surround. does the price include the aem kit? and how does it compare to the miltek? lozza

20th March 2008, 07:45	#9 (permalink)
Jeroen1000 Triangular Exhaust Join Date: 30th December 2007 Location: Belgium Posts: 242 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	170.5 bhp? Shouldn't that be 200? Or does this figure need converting

21st March 2008, 14:45	#13 (permalink)
hlxbravo Locking Wheelnut Join Date: 15th October 2007 Location: Oldbury, nr West Bromwich. Posts: 108 Thanks: 0 Thanked 1 Time in 1 Post iTrader: (0)	200bhp (or 201bhp to be precise) is the power measured at the flywheel, by the time it's driven all manner of things on the way, there is a percentage drop.

29th April 2008, 19:53	#14 (permalink)
Rnosa Valve Cap Join Date: 7th March 2008 Location: London UK Posts: 26 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	Has anyone found a soundclip of the exhaust?

3rd May 2008, 14:10	#16 (permalink)
tdi-north Commercial user Wheelnut Join Date: 3rd May 2008 Location: Warrington Posts: 66 Thanks: 1 Thanked 5 Times in 4 Posts iTrader: (0)	HKS Exhaust kit How good does this look! This setup is totally road legal and on idle and low revs sounds as quiet as stock. Open it up and it has a nice raspy sound. It made significant gains over the stock exhaust which is you look at it looks like its been driven over by a truck as its squashed in places and very restrictive at the exit pipes with some silly little baffles on the tailpipes. When combined with a CAI and the Hondata reflash we saw a jump of 14bhp and 9ft/lb torque. Just need the manifold to arrive now.

3rd May 2008, 14:25	#17 (permalink)
NEEMSTAR Nobody gets out alive Rocketship door handle Join Date: 7th October 2007 Location: In your mind Posts: 1,359 Thanks: 30 Thanked 24 Times in 24 Posts iTrader: (0)	the tail pipes and HKS surround looks cool

3rd May 2008, 14:51	#18 (permalink)
Level390 Valve Cap Join Date: 12th February 2008 Location: Malta Posts: 44 Thanks: 1 Thanked 2 Times in 2 Posts iTrader: (0)	The surround is a great idea. I'd love to see some more pics of the round pipes but not so close-up to get a better idea of how it looks.

3rd May 2008, 17:02	#19 (permalink)
philosoma Wheelnut Join Date: 23rd March 2007 Location: England Posts: 79 Thanks: 0 Thanked 1 Time in 1 Post iTrader: (0)	Yea some pics further back are needed. Very interested in this. Have the Hondata ECU on the way too. Damn you all for being so far away

3rd May 2008, 19:13	#20 (permalink)
Rnosa Valve Cap Join Date: 7th March 2008 Location: London UK Posts: 26 Thanks: 0 Thanked 0 Times in 0 Posts iTrader: (0)	This is starting to look real nice now. I am most certainly getting this done although I still have no idea what it sounds like. Still searching for a sound clip.