Spare team hekos?

fourthdisciple · 10th September 2012, 17:13

anyone got a spare passenger side one for an fn2 ? I snapped one of mine trying to fit the clips .

tonymac · 10th September 2012, 17:25

I didn't put clips on. Just cleaned the rubber with a degreaser Put lots of 3m double sided tape. And they feel like they are welded on. Few people I spoke to said to do that and it works. Hopefully you can get it sorted have you spoken to the company you brought them from you could say they were broke or something.

fourthdisciple · 10th September 2012, 17:40

no ive had them a while and did the same as you with the double sided tape .The drivers side is fine and stays in with tape but passenger side wont no matter how much I put on.

dweezle · 10th September 2012, 18:13

Clean the inside of door and run half inch double sided all the way along the edge (not too low) stick it up making sure it's secure and then do your window up and leave it up minimum 2days that way it gets a good chance of sticking, I was told this by someone and theirs have stayed in for 3yrs like this, did mine and neither have budged in 8mths, I know people buy that extra strong stuff and I also read people gluing them in.

fourthdisciple · 10th September 2012, 18:22

Quote:

Originally Posted by dweezle

Clean the inside of door and run half inch double sided all the way along the edge (not too low) stick it up making sure it's secure and then do your window up and leave it up minimum 2days that way it gets a good chance of sticking, I was told this by someone and theirs have stayed in for 3yrs like this, did mine and neither have budged in 8mths, I know people buy that extra strong stuff and I also read people gluing them in.

Thanks for the advice,one has snapped so i only have one heko I need another one .

duncansau80 · 19th September 2012, 10:01

I have same problem on my passenger side with the heko's. The driver side fits perfect but passenger side seems to sag out. Pain in the A**

RosscoMac · 19th September 2012, 12:11

I wondered what was going on with mine but it must just be this, the driver side sags out a bit too. When you push on it you hear it tap back onto the door so it's obviously lifted off a fair bit. They were already on my car though so don't know how to take them apart to reapply it or whatever.

fourthdisciple · 19th September 2012, 19:10

ive sorted it now ,I have a new set and watched a tutorial on youtube on how to fit the clips ,so dont have a problem with them falling out anymore.

RosscoMac · 19th September 2012, 19:15

Link mate?

fourthdisciple · 19th September 2012, 19:36

Quote:

Originally Posted by RosscoMac

Link mate?

just type in fitting team hekos =-]

10th September 2012, 17:13	#1 (permalink)
fourthdisciple TypeRkits.com Car: Mugenised CTR Milano red gt Join Date: 12th April 2012 Location: cambridge Posts: 1,940 Thanks given: 808 Thanked 446 Times in 406 Posts iTrader: (6)	Spare team hekos? anyone got a spare passenger side one for an fn2 ? I snapped one of mine trying to fit the clips .

10th September 2012, 18:13	#4 (permalink)
dweezle regrets his username Car: Championship White Join Date: 6th April 2012 Location: uk Posts: 2,582 Thanks given: 542 Thanked 376 Times in 348 Posts iTrader: (2)	Clean the inside of door and run half inch double sided all the way along the edge (not too low) stick it up making sure it's secure and then do your window up and leave it up minimum 2days that way it gets a good chance of sticking, I was told this by someone and theirs have stayed in for 3yrs like this, did mine and neither have budged in 8mths, I know people buy that extra strong stuff and I also read people gluing them in. Last edited by dweezle; 10th September 2012 at 18:16.

Similar Threads for: Spare team hekos?
Thread	Thread Starter	Forum	Replies	Last Post
R-Red Team hekos and a bike wash	oggyogg85	Gallery	9	16th April 2012 21:18
Black Tints,Team Hekos & Polished Triangles (& Bosses Bikes)	esse-esse	Gallery	6	11th April 2012 07:17
Team Hekos	Jpetrie	Any non Civic chat here please!	3	21st January 2012 00:31
Spacesaver, Sun blinds and Team Hekos	Rufus	Items for sale	37	9th January 2012 21:57
Fitting Team Hekos	mmmmit	Styling	11	4th August 2010 00:13

10th September 2012, 17:25	#2 (permalink)
tonymac Supporter Car: 2009 milino red CTR GT+ Join Date: 18th March 2011 Location: BRISTOL UK Posts: 807 Thanks given: 119 Thanked 96 Times in 89 Posts iTrader: (0)	I didn't put clips on. Just cleaned the rubber with a degreaser Put lots of 3m double sided tape. And they feel like they are welded on. Few people I spoke to said to do that and it works. Hopefully you can get it sorted have you spoken to the company you brought them from you could say they were broke or something.

10th September 2012, 17:40	#3 (permalink)
fourthdisciple TypeRkits.com Thread starter Car: Mugenised CTR Milano red gt Join Date: 12th April 2012 Location: cambridge Posts: 1,940 Thanks given: 808 Thanked 446 Times in 406 Posts iTrader: (6)	no ive had them a while and did the same as you with the double sided tape .The drivers side is fine and stays in with tape but passenger side wont no matter how much I put on.

19th September 2012, 10:01	#6 (permalink)
duncansau80 Supporter Car: 2008 CTR GT, Milano Join Date: 14th February 2012 Location: Cumbernauld Posts: 256 Thanks given: 49 Thanked 34 Times in 34 Posts iTrader: (2)	I have same problem on my passenger side with the heko's. The driver side fits perfect but passenger side seems to sag out. Pain in the A**

19th September 2012, 12:11	#7 (permalink)
RosscoMac I'm going fast again! Car: 2007 NHB Type-R GT Join Date: 14th February 2012 Location: Glasgow Posts: 835 Thanks given: 148 Thanked 94 Times in 91 Posts iTrader: (3)	I wondered what was going on with mine but it must just be this, the driver side sags out a bit too. When you push on it you hear it tap back onto the door so it's obviously lifted off a fair bit. They were already on my car though so don't know how to take them apart to reapply it or whatever.

19th September 2012, 19:10	#8 (permalink)
fourthdisciple TypeRkits.com Thread starter Car: Mugenised CTR Milano red gt Join Date: 12th April 2012 Location: cambridge Posts: 1,940 Thanks given: 808 Thanked 446 Times in 406 Posts iTrader: (6)	ive sorted it now ,I have a new set and watched a tutorial on youtube on how to fit the clips ,so dont have a problem with them falling out anymore.

19th September 2012, 19:15	#9 (permalink)
RosscoMac I'm going fast again! Car: 2007 NHB Type-R GT Join Date: 14th February 2012 Location: Glasgow Posts: 835 Thanks given: 148 Thanked 94 Times in 91 Posts iTrader: (3)	Link mate?