AC/Heater Blower/ mode motor not working - Civinfo
LinkBack Thread Tools
post #1 of 4 (permalink) Old 8th January 2019, 21:05 Thread Starter
Join Date: 8th January 2019
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
iTrader: (0)
Blower/ mode motor not working

Hi all, my 2006 mk8 heater blower has stopped working on me all together so was thinking it's going to be the blower motor but I've noticed the mode motor isn't working either when I know they were both working before. I've checked all the fuses and relays in the engine bay but was just wondering if I've missed anything? Any ideas people? Thanks
LJD1908 is offline  
Sponsored Links
post #2 of 4 (permalink) Old 8th January 2019, 21:33
scaramanga's Avatar
Car: 2015 white orchid 1.6 dtec
Join Date: 9th May 2011
Location: cumbria ENGLAND
Posts: 1,641
Thanks: 11
Thanked 136 Times in 135 Posts
iTrader: (1)
there is the resistor unit that's fitted just below the blower motor and much easier to replace
but if that's failed its probably the motor to blame aswell
I replaced my heater motor on my old 8g about 3 years ago
scaramanga is offline  
post #3 of 4 (permalink) Old 8th January 2019, 22:07 Thread Starter
** Thread starter **
Join Date: 8th January 2019
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
iTrader: (0)
Thanks I did look at that today but from what I've read up if they play up they still run either on low or high speed only. Just wondered if there was a link between the blower motor and the mode motor as they both seemed to have stopped working at the same time.
LJD1908 is offline  
post #4 of 4 (permalink) Old 9th July 2019, 18:31
Join Date: 9th July 2019
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
iTrader: (0)
You have to remove the glove box to be able to get at the resister, to get at the glove box i read you had to take out the centre console and a lot of the dash trim.

I've done this and the glove box starts to slide out only to be pulled back into its hole by a wire (i assume) but i can't for the life of me find what is pulling it back and its driving me mad.

How do you get the glove box out?
Chris Criss Conflict Rees is offline  

  Civinfo > 8th Generation Euro Honda Civic (2006 - 2011) > Bugs, faults and irritations (8G)

Quick Reply

Register Now

In order to be able to post messages on the Civinfo forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
Your User Name is the name that appears by all your posts on the forum, and so should not be your email address.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Similar Threads
Thread Thread Starter Forum Replies Last Post
AC/Heater Heater Blower/AC not working Sinquinox Electronics (8G) 2 4th January 2019 09:16
AC/Heater Blower not working Silverdale Bugs, faults and irritations (8G) 0 11th June 2016 09:17
AC/Heater Blower Not Working Correctly stevencavanagh Electronics (8G) 2 13th December 2015 11:58
AC/Heater Blower not working kennyb Bugs, faults and irritations (8G) 12 1st June 2015 22:58
AC/Heater 232.65 For a heater blower motor? lrthumwood Electronics (8G) 8 3rd March 2015 15:08

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome