Join Date: 26th March 2007
Thanked 6 Times in 6 Posts
Pull the trim off below the rev counter - it's just held on with clips and pulls off towards you. Unplug the cabin temperature sensor electrical plug and air tube.
Under the trim are 2 screws which hold on the binacle surround - remove these screws.
The whole trim with the heater controls can now be pulled off towards you - it's just held on with clips once the 2 screws are removed.
Unplug the VSA, heater control and starter button electrical plugs. The heater controls are held on by 3 screws.
All takes about 5 minutes.