|Topic Review (Newest First)|
|23rd November 2018 00:32|
|Shocket||About to replace everything, me w head unit, front and rears and sub plus sound deadening to whole car so will try to keep you posted|
|10th April 2018 20:18|
Originally Posted by Trev27 View Post
FLi FI6 Comp-F3 Component Speakers 6.5 speaker with separate tweeter does the tweeter just mount being the standard all ready there please help someone
|3rd April 2018 11:25|
|Trev27||When replacing the front speakers do you just unplug the tweeter and connect the new one and do the same with the woofer? or do you add a cross over somehow ??|
|30th November 2017 15:22|
Used this ring adapter and speaker for front doors:
Pioneer TS-A1733i 17cm 3-Way Coaxial Car Speakers 300W
|14th June 2017 22:04|
|Amoroso||Thanks for the guide|
|11th December 2016 21:38|
I'm wanting to improve the sound quality in my FN2 type r. It has the standard head unit, initially I'd like to replace the door speakers and the tweeters. At a later date I then intend to replace the rears.
Can someone please give me a link to some good quality but well priced speakers and tweets. Also where is best to get the adaptors from?
I'd really appreciate some links to all the stuff I'd need! I'm a complete novice!!!
|22nd December 2015 23:35|
The starter set Mattyc linked to looks like a reasonable option since it comes with sheets of different materials.
The deadening is obviously going to make some difference with regards to vibrations, but whether the other stuff will make a noticeable difference I don't know, especially as they are only just bigger than an A4 sheet. I assume correct positioning has quite a large impact, and the site does give some indication as to where to put them...
I'm not expecting anything like studio sound quality given the budget speakers/headunit I've got, but compared to other cars the Civic doors do seem to be particularly poor in terms of acoustics and vibrations/rattles, or at least mine do...
|22nd December 2015 23:18|
|Farqui||Tis a minefield|
|22nd December 2015 23:08|
Originally Posted by Farqui View Post
Did you keep the seal thing (plastic sheet) on the door?
|21st December 2015 21:19|
Sorry, no photos. I didn't go crazy, I got 2 starter packs, one for each door. And used it all.
|21st December 2015 20:37|
|Farqui||Silent Coat demo|
|21st December 2015 19:49|
Originally Posted by x5252x View Post
|21st December 2015 19:47|
Originally Posted by Farqui View Post
|21st December 2015 19:43|
^ +1 to this.
I toyed with adding sound deadening at the weekend while my door cards were off.
|21st December 2015 19:33|
It's another project I haven't had a chance to do yet...
|21st December 2015 16:20|
|Mattyc||Managed to get them finished on Sunday, took another 2 hours but I had belting hangover! Bass is much tighter than before but treble more harsh than stock speakers, now running on -4 treble setting. The crossover doesn't have a option to reduce the treble like the infinity speakers. The door with the sound deadening on the speaker adapter is definitely more bassy than the adapter with no deadening on so will re fit the left adapter with deadening attached in the future. I deadened all the doors but bass is still lacking, hope it improves when the speakers are run in.|
|20th December 2015 10:22|
|Mattyc||No amp, just stock head unit.|
|19th December 2015 12:46|
Are you going to be using a amp? I just have my speakers hooked up to the original wiring.
|19th December 2015 12:38|
Fitted one speaker, took me 3 hours! Didn't fit the first speaker adapter with deadening but gonna try and fit the second one with deadening attached to it and see which gives better bass. Will do other speaker tomorrow as didn't expect first one to take so long!
|19th December 2015 07:43|
|Mattyc||Thanks ufo blue. Hoping with the deadening and better speakers I will get a much improved bass and clarity.|
|This thread has more than 20 replies. Click here to review the whole thread.|