2006+ Honda Civic Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 75 Results
  1. General Discussion (8G)
    Hi, I have a Diesel 2.2 2008 Type S and today the long thin sheet of metal covering the exhaust mid section made a terrible noise. Sure enough all three mount points have warn through, I managed with some effort to just pull it out from between the bottom of the car and the exhaust pipe. The...
  2. Engines and Transmission (8G)
    Hi all, In need of a lot of help on how to remove the exhaust Pre- Cat. I have already removed the main Cat, turbo heat shields and pre-Cat heat shield. I've removed the 3 bolts that hold the Pre-Cat to the turbo but there is a small pipe bend that goes from the Pre-Cat to the turbo. I have...
  3. Engines and Transmission (8G)
    Hi guys, Trying to find a good catback system for the car as I would like it to sound just a little meatier but not too much as its only a type s. Also if anyone has had any look finding a nice induction kit as there are not many about that i can see for the 1.8 type s Cheers guys
  4. Engines and Transmission (8G)
    Hello! I'm looking for a new exhaust for my 2007 Mk8 1.8 Civic to get a louder and better sound. My options are limited because the exhaust must have a homologation - EC/ECE (e-mark, E-mark) to pass MOT inspections in Denmark. 1. REMUS Duplex PowerSound rear muffler (this one is with a...
  5. 9G Type R
    Hello, For 1 month and 1 week now, I've been intensively researching every day all the possible and existing exhaust systems on this famous Honda Civic Type R FK2, but I can't find exactly something that seems correct... Let me explain: First of all, this is my first sports car and my first...
  6. Engines and Transmission (8G)
    Hi folks, failed to find anything relevant, therefore creating this post. Has anyone had an experience with the high compression ratio builds for FN2, I'm speaking 12.5:1 and above ratios? Mainly in the question of exhaust. What was your setup? As we all know FN2 requires a bend at the very...
  7. Engines and Transmission (8G)
    Just noticed a hole in the last section of pipe on the drivers side from the silencer to the exit triangle/tip. Would this be an MOT failure as it's after the silencer etc so emissions should be fine? Does anyone know the part number for this last bit of pipe so I can try and source a second...
  8. General Discussion (8G)
    Hi guys, Does anyone have an FN2 with a martelius exhaust on there who wouldnt mind meeting up? Really wanted to listen to one in person before purchasing one 😀
  9. General Discussion (8G)
    Hi guys, I currently have an FN2 with a HKS intake and a Tegiwa 421 header and now just need an exhaust. I am looking to buy a Martelius exhaust but was wondering if anyone could advise on whether to get the single or double exit? The double exit is drone free however for some reason the...
  10. General Discussion (8G)
    Hi Guys, I current have a HKS intake on my FN2, and will be purchasing the Tegiwa 421 header and an exhaust. Im in two minds regarding the exhaust, its either Martelius Dual exit or the Tegiwa 70mm exhaust. I dont drive it daily only do approx 2000 miles a year on it, anyone able to advise...
  11. Engines and Transmission (8G)
    Hi, I've been looking to get a backbox delete done on my civic 1.8 as I do want a bit more sound out of my car without spending a lot of money, I am wanting a deeper sound without rasp or atleast little to no rasp when driving normally. I gave a company a phone call and they said to do mid...
  12. Engines and Transmission (8G)
    Hi, I took my honda for a service so they can investigate a smell of diesel in the car. It was the dreaded exhaust manifold... I spoke to honda uk who informed me that as there was a service missing (lockdown) and it was outside of the extended warranty they wouldnt help at all. Honda...
  13. General Discussion (8G)
    Hey everyone, first post here ☺️ I’m hoping to pick up an fn2 some time in the next month! However, I’m not a huge fan of the triangle exhaust and would like it to have round exhaust tips. my question is, would it look odd with round exhausts poking through the triangle space (with the silver...
  14. General Discussion (8G)
    Hi guys, looking to buy a new exhaust and manifold for my fn2. Was thinking of Tegiwa manifold with Martelius dual exit racing exhaust - can anyone recommend anything better than this in terms of sound.... looking for a nice deep/loud noise but not something that sounds like a metallic...
  15. General Discussion (10G)
    Hi guys, posted quite awhile back that i had the mid res removed (here). since then i've added a PRL short ram race MAF intake and gotten a custom back box/muffler/silencer attached still no res. Piping size did not change but i did go for 4inch slashed tips. sound wise, pretty low rumble...
  16. General Discussion (8G)
    The common (as it turns out) hand brake was just fine, and fell apart apparently in the technicians hand once he got in the car, so much so he had his manager come out to see the damage and sign off that he didn't do it....(When he did). I understand its a 10 year old car and its a common...
  17. General Discussion (8G)
    Hello could I have advice please, does anyone know what the best bhp performance exhaust would be for the civic type r fn2 please and if possible do you know a link to were I could get one, thanks
  18. General Discussion (8G)
    Just wondering if there are any exhaust upgrade options for the 1.4 i-vtec engine. Would the 1.8L exhaust fit by any chance? I feel with this engine there are a very limited number of basic mods available, the most I have found you can do is a remap. I understand this isn't a car for...
  19. IMG_9159_2.jpg

    My EM2 Exhaust 3" stainless, build from scratch to final (from 2007 to 2019)
1-19 of 75 Results
Top