I just noticed that the glove box opener is broken on one side and when you pull it it goes in diagonal. Can you please guide how to fix or replace it?
I appreciate the help and wish you a nice day!
Long story, bought the car in Jan 2014, thought I'd do the right thing by it, so took it to a Honda approved service and repair centre for them to replace the trim. They subsequently damaged the wing and then denied all knowledge of it, now a 50/50 story of who is telling the truth. The...
I have a 2013 Civic Touring. My phone slid across my dash and put a hole right through the plastic cover that is over the digital speedometer. I just want to confirm how to replace the whole plastic piece. I have ordered the part in but just want to know how to replace it. What part of the front...
How to Replace or Remove Foglight Housings
I made this how to as not all people want to undo the wheel arch to change a bulb and the car manual also states that this is the way it is done or if your housing got smashed you can use this method to change the unit.
This does not apply to the Type...
I Have a civic type r gt on a 57,
I need to replace the passenger side wing mirror, I have the three separate parts (cover, indicator cover and full main unit).
does anybody have the full instructions as to how to do it?
honda want to charge me £150 just to fit it and I've already...
Wondering if anyone has ever replaced the glossy covers over the front of the Speedo readout and radio/heater readout? |For some reason, mine appear to be marked on the inside....or perhaps it's possible to remove, clean and replace them? Any help much appreciated:p
PS: The dreaded rev counter...
Are there any special tools required for this job regarding the removal and replacement of the front nearside wheel bearing on my 2006 2.2 ctdi SE.
Is it relatively straight forward?
Do I need to be aware of any common issues related to this task?
CR-V EX 2007 2.2 D
Factory fitted front near side Parking Sensor permanently alarms when switched on.
How do I remove sensor - from front or rear behind bumper?
How do I remove wheel arch lining?
Can I test sensor with a meter?
Where can I obtain a spare?
I was a mechanic in the Army and at a civilian job. This is the way I change brake pads. You should not have any trouble by following this guide but still do so at your own risk.
*I recommend reading this article in it's entirety and then...
As my MOT is due up in another six weeks I've been looking closely over the car and realised my front pads are close to worn out. As the discs were looking a little lipped too, I've ordered a pair of EBC discs and greenstuff pads.
On here I see a lot of people recommend replacing the fluid...