2006+ Honda Civic Forum banner

spacers

  1. Tegiwa Spacers

    Type-R
    Looking at getting some tegiwa 20mm spacers, anyone had any experiences with these? good/bad just want to know what they're like Thanks, Jordan
  2. Other How to put wheel back on

    Wheels, Tyres, Suspension and Brakes (8G)
    Thinking of taking my wheels off, fitting spacers and painting my calipers, just wondered if this is a DIY job. Taking the wheel off is easy enough, but just wondering about the procedure to put the wheels back on. Do they need torquing? or anything else doing to them other than just doing them...
  3. Other Wheel spacers pictures

    Wheels, Tyres, Suspension and Brakes (8G)
    Has anyone got any pictures of their car with 15mm spacers on the front and 20mm on the back? just interested whether it looks better than 15mm all round?
  4. Other Spacers on 2010 Si

    Wheels, Tyres, Suspension and Brakes (8G)
    Hi, I'm new here and I've looked through all the spacers posts but can't find the info I'm looking for. I've just bought a 2010 Civic Si which has the standard 17" alloys (don't know what they're called) and I'd like to put some spacers on. Has anyone done this on an Si and what size did they...
  5. Suspension -15mm or -30mm on Type R - Talk to me (pics)

    Wheels, Tyres, Suspension and Brakes (8G)
    Just about to treat the CTR to another xmas present of springs and 15mm spacers (was thinking about 20mm rear but eibach don't do them :() I've been searching through the forum for pics but the ride height seems to look different with every car I look at, the front on the -15mm looks good...
  6. 1.4 dsi NHB dragged up from base spec

    Modification Projects
    Purchased this 1.4 dsi from a Honda dealer here in Ireland last year. It was pure basic spec and looked rather miserable.
  7. Other Eibach spacers - 2 questions

    Wheels, Tyres, Suspension and Brakes (8G)
    I have noticed that Eibach spacers are often recommended on Civinfo so it is likely that someone has enough experience with these spacers to answer my questions. ;) I'd like to install Eibach Pro-Spacers S90-4-15-010 (15mm per side): these ones - click. I'm going to use the OEM wheels only -...
  8. Wheel Tech Need help with offset, 9.5'' et35 ?

    Wheels, Tyres, Suspension and Brakes (8G)
    I currently have 17'' momo ten-s on which i'm assuming are 7'' wide with et42,(looked up the standard size sent out for 8th gen civic). I'm looking to get a set of alloys which are 19'' 9.5'' wide and et35, but that would mean the wheels are 25mm extra on the inside and 39mm extra on the out...
  9. Alloys Choice Need some wheels advice !! :)

    Wheels, Tyres, Suspension and Brakes (8G)
    Ive been wondering what to do wheels wise for a while. Im no closer to deciding what to do ! Originally the plan was get spacers and springs fitted and keep blades. However there showing a fair bit of wear now and the repair with original paint is so expensive. Started looking around at new...
  10. Other Wheel Spacers?

    Wheels, Tyres, Suspension and Brakes (8G)
    Hi everyone, So i have 16" alloys on my civic. At the moment, bigger wheels are out of the picture, i just can't afford them. I was wondering what some wheel spacers would look like on my car, i don't like how the arches stick out over the wheels - if u know what i mean. Also, how do i deal...
Top