will make anyone cringe, but for the cheap and cheerful Corolla I ran, I used stilsons to hold the pulley/spiders, with a power bar/socket on the nut.....it worked/desperate time called for desperate measure.
Honda File Share - 9G Service Manual Excerpts
As you may have seen in a few of my other threads, I've been collecting service bulletins et al wherever I find them, Primarily for my own future reference and benefit, but also so that I can share them with others when needed.
As I've got a fair...
Is this 'the business' diagnostic tool (with laptop)?
This one has a double board. What's that all about?
Better bet than say a Foxwell 510 or 630 ODB reader?
i'm sure it can be made for any caliper that allows the dust seal to be replaced without removing the piston, but here's what I've done for the 9G ATE/Teves rear caliper seal. caliper remains on the car.
take one 54mm hole saw. depth must be bigger than the seal your fitting, but also shallow...
Hi there, I just bought an old 06 Honda Civic EX. It comes with handsfree capability and voice commands but it's not working.... well I've found an exposed audiojack at the top centre on my windscreen/windshield. Can anyone tell me where this jack will need to be plugged in?
Any help would be...
(Just a brief overview)
I’ve wanted a parts washer for a while, however I also wanted it to be heated. Buying a heated one is expensive... so I made my own.
Bought a large parts washer (always bigger than the dimensions make you feel it will be) bought 2 3kW Incoloy immersion...