2006+ Honda Civic Forum banner

et35 on type r

1429 Views 7 Replies 3 Participants Last post by  k20_ed
Guys , will a 35 offset be ok on my type r ? Ive lowered 15mm

i want to leave enough clearance for a bbk in the future and i know et40 is ok but if i can get away with 35 ........ :)

Thanks in advance
1 - 8 of 8 Posts
Should be ok I would think. Aggressive but ok
  • Like
Reactions: 1
Aggressive is good ;) wont stick out too much from the arch for MOT ?
Should'nt do. Im pretty sure David runs et35 on his Rays. Have you had a FRS done? Perhaps some camber would help
  • Like
Reactions: 1
Cool cheers ed will check Daves thread

yeah frs is done on front , i have 1 degree neg
Right on the limit depending on rim width.
Right on the limit depending on rim width.
They are 18 x 8 et 35 :)
They are 18 x 8 et 35 :)
Sounds just about perfect
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top