2006+ Honda Civic Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
326 Posts
Discussion Starter #1
hi guys , hoping one of ya can help me

my newly installed invidia exhaust has water dripping from one of the sections (at the front) .

i was thinkin it might be the a/c cooler but its dripping from a cold start when the car hasnt been drove.

any ideas???!!!!!

:mad:
 

Attachments

·
Premium Member
Joined
·
1,930 Posts
Looks like water (condensation).

Try loosening the bolt moving the clamp out of the way, wipe the area with a cloth to remove any grit etc and put the clamp on and retighten it. go for a good decent drive, let the exhaust cool down slightly and retighten it again.

See if that cures the problem. I had this aswell on my milltek and did the above. All sorted now.
 

·
Registered
Joined
·
326 Posts
Discussion Starter #3
Looks like water (condensation).

Try loosening the bolt moving the clamp out of the way, wipe the area with a cloth to remove any grit etc and put the clamp on and retighten it. go for a good decent drive, let the exhaust cool down slightly and retighten it again.

See if that cures the problem. I had this aswell on my milltek and did the above. All sorted now.
thanks for the advice. ill try that out
 
1 - 3 of 3 Posts
Top