2006+ Honda Civic Forum banner
1 - 18 of 18 Posts

Registered
Joined
68 Posts
Discussion Starter · #1 ·
Hi all,

Is it possible to remove the exterior b-pillar trim from an FK2 model? I've read that you can with the CTR, but obviously the FK2 has a different b-pillar design. I want to take them out so I give then a carbon wrap, as the current trim (stick on vinyl I assume?) Is a bit tatty.

Any advice would be appreciated 馃憤馃徑
 

i-Vtec
Joined
5,152 Posts
You mean the black part of the door? Pretty sure(without going outside to check), its all part of the door and isnt removable on the 5 door.
 

Registered
Joined
68 Posts
Discussion Starter · #3 ·
You mean the black part of the door? Pretty sure(without going outside to check), its all part of the door and isnt removable on the 5 door.
Yeah that bit. Strange that it's removable on the CTR and the non-Euro versions of the gen 8. I thought there must be a way of getting that crappy vinyl off.
 

Registered
night hawk black 09 FN2
Joined
122 Posts
yes on the CTR there is a screw in the door jam and then slide them up and away ive taken mine off to wrap them.
 

Registered
Joined
68 Posts
Discussion Starter · #9 ·

Super Moderator
Joined
4,525 Posts
use some washing up liquid or silicone spray to get the thing in the groove to start and it should be plain sailing.
 
1 - 18 of 18 Posts
Top