2006+ Honda Civic Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
Hi,

I got an allignment job and rear toe on the left side is out :frown2: Could you please let me know is there anyway to fix this with shims and what size would I need to buy?

Here are the results:

Rear
Camber:
Left: -1.05 Right: -1.17

Toe:
Left: 0.04 Right: 0.13

Geometrical driving axis: -0.04
-------------------------------------------------------------------------

Front
Camber:
Left: 0.06 Right: 0.01

Caster:
Left: 4.10 Right: 4.01

Toe:
Left: 0.01 Right: 0.01
 

·
Registered
Joined
·
2,472 Posts
Hi,

I got an allignment job and rear toe on the left side is out :frown2: Could you please let me know is there anyway to fix this with shims and what size would I need to buy?

Here are the results:

Rear
Camber:
Left: -1.05 Right: -1.17

Toe:
Left: 0.04 Right: 0.13

Geometrical driving axis: -0.04
-------------------------------------------------------------------------

Front
Camber:
Left: 0.06 Right: 0.01

Caster:
Left: 4.10 Right: 4.01

Toe:
Left: 0.01 Right: 0.01
Do you know if those readings are in 'mm' or 'minutes'?

If it is easier, you can send me a copy or image of your printout and send it to my email? [email protected]

Hope this helps,
Rich
 
1 - 4 of 4 Posts
Top