2006+ Honda Civic Forum banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
120 Posts
Discussion Starter #1
How hard is it to refit the standard airbox and all the gubbins that goes with it?, I'm mainly thinking the bit that goes into the bumper as that seemed to be a pain in the arsenal to remove, friend fitted the cpl intake for me a few weeks back but planning to remove it and put back to standard as I think I may be getting rid f the civic in the near future (what to though I'm not sure).
 

·
Premium Member
Joined
·
554 Posts
Not sure on the removal of the cpl cai as i have never fitted one but once it's out fitting the oem unit again is a piece of p***.

All i would advise is to put a bit of grease on the rubber mounts the airbox goes onto as it can be hard to get it on without greasing them.
 

·
Premium Member
2008 Civic Type R
Joined
·
806 Posts
Shouldn't be too bad. Don't be afraid of getting the bumper off either, it really isn't that bad if you take it steady! I fit my cpl and there is only one nut that requires some wizardry/bumper removal to reach, I didn't even have to take it all off, just unclipped one side.
 
1 - 3 of 3 Posts
Top