2006+ Honda Civic Forum banner

Will this dent pull out?

1094 Views 6 Replies 6 Participants Last post by  RA108
4
Just wondering, it's small and looks like it'll be creased if pulled out

How much will it cost?

Attachments

See less See more
1 - 7 of 7 Posts
Is that on the bonnet ? if so i would think someone decent would be able to make it at least 95% perfect . In the mean time id stop hitting golf balls at your car ! lol
Is that on the bonnet ? if so i would think someone decent would be able to make it at least 95% perfect . In the mean time id stop hitting golf balls at your car ! lol
It actually looks A LOT worse in those photos, couldn't believe it when I saw them. I think it was a stone, on the motorway. But can't believe it hasn't chipped the paint.
Yes, I had a similar one in my door & dent wizzard got rid of it, can't tell now. Think it was £60+vat
It depends if the bonnet skin is bonded to the frame around the dent.

It looks quite deep so the metal will be stretched.

Bonnets are a nightmare to repair especially on thin Honda metal.

Could phone one of the dent wizard companies to see if they could do it, might not be 100% but would work out cheaper than going to a bodyshop.
Yes, I had a similar one in my door & dent wizzard got rid of it, can't tell now. Think it was £60+vat
+1, if your near barnsley I know a guy who'll do that for £30. Owns a dent removal company but he does a lot of work on recomodation. He has done work on all my cars. Really nice guy!!!
It will pull but its difficult to say. In photo 2 it looks shallow. In the others it looks deep.

If it shallow a Ding King will get that out (around £14 from Amazon).

If it's quite deep the metal has almost certainly stretched and whilst the Ding King will pull it out, I wouldn't expect it to come out perfect therefore.

For perfect it may need a combination of pulling + filling and respray.

I can give you tips on how to use the Ding King to best effect.
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top