Technical Specifications

From CivInfo Wiki
Jump to: navigation, search

Type S 1.8

Item
Measurement
Qualification
Specification
DIMENSIONS
Overall length
4,275 mm (168.3 in.)
Overall width
1,785 mm (70.2 in.)
Overall height
1,460 mm (57.5 in.)
Wheelbase
2,635 mm (103.7 in.)
Track
Front
1,504 mm (59.2 in.)
Rear
1,530 mm (60.2 in.)
Seating capacity
Five (5)
WEIGHT
Curb weight
1,196−1,317 kg (2,637−2,903 lbs)
Max. permissible weight
1,750 kg (3,858 lbs)
ENGINE
Type
Water cooled, 4-stroke SOHC i-VTEC engine
Cylinder arrangement
Inline 4-cylinder, transverse
Bore and stroke
81.0 x 87.3 mm (3.19 x 3.44 in.)
Displacement
1,799 cm 3 (110 cu in.)
Compression ratio
10.5
Valve train
Chain drive, SOHC i-VTEC 4 valves per cylinder
Lubrication system
Forced, wet sump, with trochoid pump
Oil pump displacement
At 6,800 rpm (min −1 )
52.3 L (55.3 US qt, 46.0 Imp qt)/minute
Water pump displacement
At 6,000 rpm (min −1 )
104 L (110 US qt, 91.5 Imp qt)/minute
Fuel required
UNLEADED petrol with 95 Research Octane Number or higher
STARTER
Type
Gear reduction
Normal output
1.0 kW
Nominal voltage
12 V
Hour rating
30 seconds
Direction of rotation
Clockwise as viewed from gear end
CLUTCH (PHE4 manual transmission)
Clutch type
Single plate dry, diaphragm spring
Clutch friction material surface area
186 cm 2 (28.83 sq in.)
CLUTCH (PJD4 automated manual transmission)
Clutch type
Single plate dry, diaphragm spring
Clutch friction material surface area
186 cm 2 (28.83 sq in.)
PHE4 MANUAL TRANSMISSION
Type
Synchronized, 6-speed forward, 1 reverse
Primary reduction
Direct 1:1
Gear ratio
1st
3.142
2nd
1.869
3rd
1.303
4th
1.054
5th
0.853
6th
0.727
Reverse
3.307
Final reduction
Type
Single helical gear
Gear ratio
4.294
PJD4 MANUAL TRANSMISSION (i-SHIFT)
Type
Synchronized, 6-speed forward, 1 reverse
Primary reduction
Direct 1:1
Gear ratio
1st
3.142
2nd
1.869
3rd
1.303
4th
1.054
5th
0.853
6th
0.727
Reverse
3.308
Final reduction
Type
Single helical gear
Gear ratio
4.294
STEERING
Type
Rack and pinion with electrical power-assisted
Overall ratio
Base
11.8
Type-S
12.0
Turns, lock-to-lock
Base
2.42
Type-S
2.25
Steering wheel diameter
360 mm (14.0 in.)
SUSPENSION
Type
Front
MacPherson strut, coil spring, anti-roll bar
Rear
Torsion beam, coil spring
Shock absorber
Front
Telescopic, hydraulic, nitrogen gas-filled
Rear
Telescopic, hydraulic, nitrogen gas-filled
TYRES
Size
See tyre information label attatched to the doorjamb
BRAKES
Type of service brake
Front
Power-assisted self-adjusting ventilated disc
Rear
Power-assisted self-adjusting solid disc
Type of parking brake
Mechanical actuating, rear wheels
Pad friction surface area
Front
48.6 cm 2 (7.5 sq in.) x 2
Rear
25.1 cm 2 (3.9 sq in.) x 2
AIR CONDITIONING
Compressor
Type
Scroll
Capacity
77.1 mL (4.7 cu in.)/rev.
Maximum speed
10,000 rpm (min −1 )
Lubricant capacity
75mL (2 1/2 fl·oz)
Lubricant type
SP-10
Condenser
Type
Corrugated fin
Evaporator
Type
Corrugated fin
Blower
Type
Sirocco fan
Motor type
210 W/12 V
Speed control
Infinite variable
Maximum capacity
480 m 3 (16,923 cu ft)/h
Temperature control
Air-mix type
Compressor clutch
Type
Dry, single plate, Poly V-belt drive
Electrical power consumption at 20 °C (68 °F)
42 W maximum at 12 V
Refrigerant
Type
HFC-134 a (R-134 a)
Capacity
440−490 g (15.5−17.3 oz)
ELECTRICAL RATINGS
Battery
12 V−45 Ah/20 HR (12 V−36 Ah/5 HR)
Fuses
Under-hood fuse/relay box
100 A, 70 A, 50 A, 40 A, 30 A, 20 A, 15 A, 10 A, 7.5 A
Under-dash fuse/relay box
30 A, 20 A, 15 A, 10 A, 7.5 A
Light bulbs
Headlight high beam
12 V−55 W
Headlight low beam
12 V−55 W (H11)
12 V−35 W (HID)
Front turn signal lights
12 V−21 W
Side turn signal lights
12 V−5 W
Front position lights
12 V−5 W
Front fog lights
12 V−55 W
Rear fog lights
12 V−21 W
Rear turn signal lights
12 V−21 W
Brake/Taillights
12 V−21/5 W
Inner taillights
12 V−5 W
High mount brake light
LED
Back-up lights
12 V−18 W
License plate light
12 V−5 W
Ceiling lights
12 V−8 W
Cargo area light
12 V−5 W
Map lights
12 V−5 W
Ambient light
LED
Vanity mirror lights
12−2 W
Gauge lights
LED
Indicator lights
LED


Item
Measurement
Qualification
Standard or New
Service Limit
Alternator
Output
At 13.5 V and normal engine temperature
90 A
Coil (rotor) resistance
At 20 °C (68 °F)
1.84−2.10 Ω
Slip ring O.D.
22.7 mm (0.89 in.)
21.2 mm (0.83 in.)
Brush length
15.5 mm (0.61 in.)
1.5 mm (0.06 in.)
Brush spring tension
3.3−4.1 N (0.34−0.42 kgf, 0.75−0.93 lbf)


Item
Measurement
Qualification
Standard or New
Radiator
Coolant capacities (including engine, heater, hoses, and reservoir)
Use genuine Honda All Season Antifreeze/Coolant Type 2
Engine overhaul
6.8 L (1.80 US gal, 1.50 Imp gal)
Coolant change
5.3 L (1.40 US gal, 1.17 Imp gal)


Item
Measurement
Qualification
Standard or New
Radiator cap
Opening pressure
93−123 kPa (0.95−1.25 kgf/cm 2 , 14−18 psi)


Item
Measurement
Qualification
Standard or New
Service Limit
Spark plug
Type
NGK: IZFR6K11S
DENSO: SKJ20DR-M11S
Gap
1.0−1.1 mm (0.039−0.043 in.)
———


Item
Measurement
Qualification
Standard or New
Service Limit
Engine oil
Capacity
Engine overhaul
4.5 L (4.8 US qt, 4.0 Imp qt)
Oil change including filter
3.7 L (3.9 US qt, 3.3 Imp qt)
Oil change without filter
3.5 L (3.7 US qt, 3.1 Imp qt)


Item
Measurement
Qualification
Standard or New
Service Limit
Wheel alignment
Camber
Front
0 ° 00 ′±30 ′
Rear
−1 ° 00 ′±30 ′
Caster
Front
4 ° 14 ′±30 ′
Total toe-in
Front
0±2 mm (0±0.08 in.)
Rear
4±2 mm (0.16±0.08 in.)
Front wheel turning angle equipped with 16 inch wheel
Inward
41 ° 05 ′±2 °
Outward
33 ° 05 ′ (Reference)
Front wheel turning angle equipped with 17 inch wheel
Inward
36 ° 44 ′±2 °
Outward
30 ° 38 ′ (Reference)


Item
Measurement
Qualification
Standard or New
Service Limit
Brake disc
Thickness
Front
23.0 mm (0.91 in.)
21.0 mm (0.83 in.)
Rear
9.0 mm (0.35 in.)
8.0 mm (0.31 in.)
Runout
Front
———
0.10 mm (0.004 in.)
Rear
———
0.10 mm (0.004 in.)
Parallelism
Front and rear
———
0.015 mm (0.0006 in.)
Item
Measurement
Qualification
Standard or New
Service Limit
Brake pad
Thickness
Front
11.0 mm (0.43 in.)
1.6 mm (0.06 in.)
Rear
9.0 mm (0.35 in.)
1.6 mm (0.06 in.)


Type S 2.2

Item
Measurement
Qualification
Specification
DIMENSIONS
Overall length
4,275 mm (168.3 in.)
Overall width
1,785 mm (70.2 in.)
Overall height
1,460 mm (57.5 in.)
Wheelbase
2,635 mm (103.7 in.)
Track
Front
1,504 mm (59.2 in.)
Rear
1,530 mm (60.2 in.)
Seating capacity
Five (5)
WEIGHT
Curb weight
1,196−1,317 kg (2,637−2,903 lbs)
Max. permissible weight
1,890 kg (4,167 lbs)
ENGINE
Type
Water-cooled, 4-stroke DOHC intercooler turbo diesel engine
Cylinder arrangement
Inline 4-cylinder, transverse
Bore and stroke
85.0 x 97.1 mm (3.35 x 3.82 in.)
Displacement
2,204 cm 3 (134.5 cu in.)
Compression ratio
16.7
Valve train
Chain driven, DOHC 4 valves per cylinder
Lubrication system
Forced, wet sump, with trochoid pump
Oil pump displacement
At 4,000 rpm (min −1 )
52.2 L (55.2 US qt, 45.9 Imp qt)/minute
Water pump displacement
At 6,000 rpm (min −1 )
215 L (227 US qt, 189 Imp qt)/minute
Fuel required
EC REF. Fuel
STARTER
Type
Gear reduction
Normal output
1.9 kW
Nominal voltage
12 V
Hour rating
30 seconds
Rotation direction
Clockwise as viewed from gear end
CLUTCH
Clutch type
Single plate dry, diaphragm spring
Clutch friction material surface area
264 cm 2 (40.92 sq in.)
MANUAL TRANSMISSION
Type
Synchronized, 6-speed forward, 1 reverse
Primary reduction
Direct 1:1
Gear ratio
1st
3.933
2nd
2.037
3rd
1.314
4th
0.975
5th
0.777
6th
0.653
Reverse
4.008
Final reduction
Type
Single helical gear
Gear ratio
3.285
STEERING
Type
Rack and pinion with electrical power-assisted
Overall ratio
KG 2.2 Base model
12.0
Except KG 2.2 Base model
12.1
Turns, lock-to-lock
KG 2.2 Base model
2.37
Except KG 2.2 Base model
2.29
Steering wheel diameter
360 mm (14.0 in.)
SUSPENSION
Type
Front
MacPherson strut, coil spring, anti-roll bar
Rear
Torsion beam, coil spring
Shock absorber
Front
Telescopic, hydraulic, nitrogen gas-filled
Rear
Telescopic, hydraulic, nitrogen gas-filled
TYRES
Size
See tyre information label attached to the door jamb
BRAKES
Type of service brake
Front
Power-assisted self-adjusting ventilated disc
Rear
Power-assisted self-adjusting solid disc
Type of parking brake
Mechanical actuating, rear wheels
Pad friction surface area
Front
48.6 cm 2 (7.5 sq in.) x 2
Rear
25.1 cm 2 (3.9 sq in.) x 2
AIR CONDITIONING
Compressor
Type
Scroll
Capacity
77.1 mL (4.7 cu in.)/rev.
Maximum speed
10,000 rpm (min −1 )
Lubricant capacity
75 mL (2 1/2 fl·oz)
Lubricant type
SP-10
Condenser
Type
Corrugated fin
Evaporator
Type
Corrugated fin
Blower
Type
Sirocco fan
Motor type
210 W/12 V
Speed control
Infinite variable
Maximum capacity
480 m 3 (16.923 cu ft)/h
Temperature control
Air-mix type
Compressor clutch
Type
Dry, single plate, poly-V belt drive
Electrical power consumption at 20 °C (68 °F)
42 W maximum at 12 V
Refrigerant
Type
HFC-134a (R-134a)
Capacity
440−490 g (15.5−17.3 oz)
ELECTRICAL RATINGS
Battery
12 V−74 AH/20 hours
Fuses
Under-hood fuse/relay box
100 A, 80 A, 70 A, 60 A, 50 A, 40 A, 30 A, 20 A, 15 A, 10 A, 7.5 A
Under-dash fuse/relay box
30 A, 20 A, 15 A, 10 A, 7.5 A
Light bulbs
Headlight high beam
12 V−55 W
Headlight low beam
12 V−55 W
12 V−35 W (HID)
Front fog lights
12 V−55 W
Front turn signal lights
12 V−21 W
Front position lights
12 V−5 W
Side turn signal lights
12 V−5 W
Front fog lights
21−55 W
Rear fog light
12 V−21 W
Rear turn signal lights
12 V−21 W
Stop/taillights
12 V−21/5 W
Taillights
12 V−5 W
High-mount brake light
LED
Back-up lights
12 V−18 W
License plate light
12 V−5 W
Ceiling light
12 V−8 W
Cargo area light
12 V−5 W
Map lights
12 V−5 W
Gauge lights
LED
Indicator lights
LED


Item
Measurement
Qualification
Standard or New
Service Limit
Alternator
Output
At 13.5 V and normal engine temperature
105 A
Coil (rotor) resistance
At 20 °C (68 °F)
2.5 Ω
Slip ring O.D.
14.4 mm (0.57 in.)
14.0 mm (0.55 in.)
Brush length
10.5 mm (0.41 in.)
1.5 mm (0.06 in.)
Brush spring tension
3.3−4.1 N (0.34−0.42 kgf, 0.7−0.9 lbf)


Item
Measurement
Qualification
Standard or New
Radiator
Coolant capacities (includes engine, heater, hoses, and reservoir)
Use genuine Honda All Season Antifreeze/Coolant Type 2
Engine overhaul
7.8 L (2.06 US gal, 1.72 Imp gal)
Coolant change
6.6 L (1.74 US gal, 1.45 Imp gal)


Item
Measurement
Qualification
Standard or New
Engine idle
In neutral
850±50 rpm (min −1 )


Item
Measurement
Qualification
Standard or New
Service Limit
Engine oil
Capacity
Engine overhaul
6.8 L (7.2 US qt, 6.0 Imp qt)
Oil change including filter
5.9 L (6.2 US qt, 5.2 Imp qt)
Oil change without filter
5.5 L (5.8 US qt, 4.8 Imp qt)


Item
Measurement
Qualification
Standard or New
Service Limit
Wheel alignment
Camber
Front
0 ° 00 ′±30 ′
Rear
−1 ° 00 ′±30 ′
Caster
Front
4 ° 14 ′±30 ′
Total Toe-in
Front
0±2 mm (0±0.08 in.)
Rear
4±2 mm (0.16±0.08 in.)
Front wheel turning angle equipped with 16 inch wheel
Inward
38 ° 32 ′±2 °
Outward
32 ° 31 ′ (Reference)
Front wheel turning angle equipped with 15 inch wheel or 17 inch wheel
Inward
36 ° 32 ′±2 °
Outward
31 ° 16 ′ (Reference)


Item
Measurement
Qualification
Standard or New
Service Limit
Brake disc
Thickness
Front
23.0 mm (0.91 in.)
21.0 mm (0.83 in.)
Rear
9.0 mm (0.35 in.)
8.0 mm (0.31 in.)
Runout
Front
———
0.10 mm (0.004 in.)
Rear
———
0.10 mm (0.004 in.)
Parallelism
Front and rear
———
0.015 mm (0.0006 in.)


Item
Measurement
Qualification
Standard or New
Service Limit
Brake pad
Thickness
Front
11.0 mm (0.43 in.)
1.6 mm (0.06 in.)
Rear
9.0 mm (0.35 in.)
1.6 mm (0.06 in.)


5 Door 2.2

Item  Measurement  Qualification  Specification 
DIMENSIONS  Overall length    4,248 mm (167.2 in.) 
Overall width    1,765 mm (69.5 in.) 
Overall height    1,460 mm (57.5 in.) 
Wheelbase    2,635 mm (103.7 in.) 
Track  Front  1,504 mm (59.2 in.) 
Rear  1,510 mm (59.4 in.) 
Seating capacity    Five (5) 
WEIGHT  Curb weight    1,364-1,440 kg (3,007-3,175 lbs) 
Max. permissible weight    1,890 kg (3,390 lbs) 
ENGINE  Type    Water-cooled, 4-stroke DOHC intercooler turbo diesel engine 
Cylinder arrangement    Inline 4-cylinder, transverse 
Bore and stroke    85.0 x 97.1 mm (3.35 x 3.82 in.) 
Displacement    2,204 cm3 (134.5 cu in.) 
Compression ratio    16.7 
Valve train    Chain driven, DOHC 4 valves per cylinder 
Lubrication system    Forced, wet sump, with trochoid pump 
Oil pump displacement  At 4,000 rpm (min-1)  52.2 L (55.2 US qt, 45.9 Imp qt)/minute 
Water pump displacement  At 6,000 rpm (min-1)  215 L (227 US qt, 189 Imp qt)/minute 
Fuel required    EC REF. Fuel 
STARTER  Type    Gear reduction 
Normal output    2.0 kW 
Nominal voltage    12 V 
Hour rating    30 seconds 
Rotation direction    Clockwise as viewed from gear end 
CLUTCH  Clutch type    Single plate dry, diaphragm spring 
Clutch friction material surface area    264 cm2 (40.92 sq in.) 
MANUAL TRANSMISSION  Type    Synchronized, 6-speed forward, 1 reverse 
Primary reduction    Direct 1:1 
Gear ratio  1st  3.933 
2nd  2.037 
3rd  1.250 
4th  0.929 
5th  0.778 
6th  0.653 
Reverse  4.008 
Final reduction  Type  Single helical gear 
Gear ratio  3.550 


Item  Measurement  Qualification  Specification 
STEERING  Type    Rack and pinion with electrical power-assisted 
Overall ratio  205/55R16 91V  12.03 
225/45R17 91Y  12.13 
Turns, lock-to-lock  205/55R16 91V  2.37 
225/45R17 91Y  2.29 
Steering wheel diameter    360 mm (14.0 in.) 
SUSPENSION  Type  Front  MacPherson strut, coil spring, anti-roll bar 
Rear  Torsion beam, coil spring 
Shock absorber  Front  Telescopic, hydraulic, nitrogen gas-filled 
Rear  Telescopic, hydraulic, nitrogen gas-filled 
TYRES  Size    See tyre information label attached to the door jamb 
BRAKES  Type of service brake  Front  Power-assisted self-adjusting ventilated disc 
Rear  Power-assisted self-adjusting solid disc 
Type of parking brake    Mechanical actuating, rear wheels 
Pad friction surface area  Front  48.6 cm2 (7.5 sq in.) x 2 
Rear  25.1 cm2 (3.9 sq in.) x 2 
AIR CONDITIONING  Compressor  Type  Scroll 
Capacity  75 mL (4.58 cu in.)/rev. 
Maximum speed  10,000 rpm (min-1) 
Lubricant capacity  75 mL (2 1/2 fl oz) 
Lubricant type  SANDEN SP-10 
Condenser  Type  Corrugated fin 
Evaporator  Type  Corrugated fin 
Blower  Type  Sirocco fan 
Motor type  210 W/12 V 
Speed control  Infinite variable 
Maximum capacity  485 m3 (17.100 cu ft)/h 
Temperature control    Air-mix type 
Compressor clutch  Type  Dry, single plate, poly-V belt drive 
Electrical power consumption at 20 °C (68 °F)  42 W maximum at 12 V 
Refrigerant  Type  HFC-134a (R-134a) 
Capacity  440-490 g (15.5-17.2 oz) 


Item  Measurement  Qualification  Specification 
ELECTRICAL RATINGS  Battery    12 V-74 AH/20 hours 
Starter    12 V-2.0 kW 
Fuses  Under-hood fuse/relay box  100 A, 70 A, 50 A, 40 A, 30 A, 20 A, 15 A, 10 A, 7.5 A 
Under-dash fuse/relay box  30 A, 20 A, 15 A, 10 A, 7.5 A 
Light bulbs  Headlight high beam  12 V-55 W 
Headlight low beam  12 V-55 W 
12 V-35 W (HID) 
Front fog lights  12 V-55 W 
Front turn signal lights  12 V-21 W 
Front position lights  12 V-5 W 
Side turn signal lights  12 V-5 W 
Rear turn signal lights  12 V-21 W 
Stop/taillights  12 V-21/5 W 
Taillights  12 V-5 W 
High-mount brake light  LED 
Back-up lights  12 V-18 W 
License plate light  12 V-5 W 
Front fog lights  21-55 W 
Rear fog light  12 V-21 W 
Ceiling light  12 V-8 W 
Cargo area light  12 V-5 W 
Map lights  12 V-5 W 
Gauge lights  LED 
Indicator lights  LED 


 
Item  Measurement  Qualification  Standard or New 
Steering wheel  Rotational play measured at outside edge with engine running    0-10 mm (0-0.39 in.) 
Starting load measured at outside edge with engine running    34 N (3.5 kgf, 7.7 lbf) 
Gearbox  Angle of rack guide screw loosened from locked position    7 °±3 ° 


 
Item  Measurement  Qualification  Standard or New  Service Limit 
Wheel alignment  Camber  Front  0 ° 00 ¢±30 ¢ 
Rear  -1 ° 00 ¢±30 ¢ 
Caster  Front  4 ° 14 ¢±30 ¢ 
Total Toe-in  Front  0±2 mm (0±0.08 in.) 
Rear  4±2 mm (0.16±0.08 in.) 
Front wheel turning angle equipped with 205/55R16 91H or 205/55R16 91V tyre  Inward  41 ° 05 ¢±2 ° 
Outward  33 ° 05 ¢ (Reference) 
Front wheel turning angle equipped with 225/45ZR17 91Y tyre  Inward  36 ° 44 ¢±2 ° 
Outward  30 ° 38 ¢ (Reference) 
Wheel  Steel wheel runout  Axial  0-1.0 mm (0-0.04 in.)  2.0 mm (0.08 in.) 
Radial  0-1.0 mm (0-0.04 in.)  1.5 mm (0.06 in.) 
Aluminum wheel runout  Axial  0-0.7 mm (0-0.03 in.)  2.0 mm (0.08 in.) 
Radial  0-0.7 mm (0-0.04 in.)  1.5 mm (0.06 in.) 
Wheel bearing  End play  Front  0-0.05 mm (0-0.002 in.) 
Rear  0-0.05 mm (0-0.002 in.) 


 
Item  Measurement  Qualification  Standard or New  Service Limit 
Parking brake lever  Distance traveled when lever pulled with 196 N (20 kgf, 44 lbf) of force    8 to 9 clicks 
Brake pedal  Pedal height (carpet removed)  LHD  132 mm (5.20 in.) 
RHD  152 mm (5.98 in.) 
Free play    1.0-5.0 mm (0.039-0.20 in.) 
Master cylinder  Piston-to-pushrod clearance    No adjust 
Brake disc  Thickness  Front  22.9-23.1 mm (0.90-0.91 in.)  21.0 mm (0.83 in.) 
Rear  8.9-9.1 mm (0.35-0.36 in.)  7.0 mm (0.28 in.) 
Runout  Front  ———  0.10 mm (0.004 in.) 
Rear  ———  0.10 mm (0.004 in.) 
Parallelism  Front and rear  ———  0.015 mm (0.0006 in.) 
Brake pad  Thickness  Front  11.0 mm (0.43 in.)  1.6 mm (0.06 in.) 
Rear  9.0 mm (0.35 in.)  1.6 mm (0.06 in.) 
Brake booster
- With VSA 
Master cylinder oil pressure  Vacuum
kPa (mmHg, in.Hg) 
Brake pedal pressure
N (kgf, lbf) 
kPa (kgf/cm2, psi) 
0 (0, 0)  98 (10, 22)  0 (0, 0) 
294 (30, 66)  1,220 (12.4, 177) 
66.7 (500, 19.7)  98 (10, 22)  4,270 (43.5, 619) 
294 (30, 66)  12,410 (126.5, 1,799) 
Brake booster
- With ABS 
Master cylinder oil pressure  Vacuum
kPa (mmHg, in.Hg) 
Brake pedal pressure
N (kgf, lbf) 
kPa (kgf/cm2, psi) 
0 (0, 0)  98 (10, 22)  0 (0, 0) 
294 (30, 66)  1,220 (12.4, 177) 
97.3 (730, 28.7)  98 (10, 22)  4,720 (48.1, 684) 
294 (30, 66)  15,670 (159.8, 2,272) 


 
Item  Measurement  Qualification  Standard or New 
Refrigerant  Type    HFC-134a (R-134a) 
Capacity of system    440-490 g (15.5-17.2 oz) 
Refrigerant oil  Type    SANDEN: SP-10
(P/N 38897-P13-003, 38898-P13-003 or 38899-P13-A01) 
Capacity of components  Condenser  20 mL (5/6 fl oz) 
Evaporator  35 mL (1 1/6 fl oz) 
Each line and hose  10 mL (1/3 fl oz, 0.4 Imp oz) 
Compressor  75-85 mL (2 1/2-2 5/6 fl oz, 2.6-3.0 Imp oz) 
Compressor  Field coil resistance  At 20 °C (68 °F)  3.15-3.45 W 
Pulley-to-pressure plate clearance    0.35-0.65 mm (0.014-0.026 in.) 


5 door Petrol

Item  Measurement  Qualification  Specification 
DIMENSIONS  Overall length    4,248 mm (167.2 in.) 
Overall width    1,765 mm (69.5 in.) 
Overall height    1,460 mm (57.5 in.) 
Wheelbase    2,635 mm (103.7 in.) 
Track  Front  1,504 mm (59.2 in.) 
Rear  1,510 mm (59.4 in.) 
Seating capacity    Five (5) 
WEIGHT  Max. permissible weight  L13A7 engine model  1,650 kg (3,638 lbs) 
R18A2 engine model  1,750 kg (3,858 lbs) 
L13A7 ENGINE  Type    Water-cooled, 4-stroke SOHC engine 
Cylinder arrangement    Inline 4-cylinder, transverse 
Bore and stroke    73 x 80 mm (2.87 x 3.15 in.) 
Displacement    1,339 cm3 (82 cu in.) 
Compression ratio    10.8 
Valve train    Chain drive, SOHC 2 valves per cylinder 
Lubrication system    Forced, wet sump, with trochoid pump 
Oil pump displacement  At 6,300 rpm (min-1)  44.6 L (47.1 US qt, 39.2 lmp qt)/minute 
Water pump displacement  At 6,000 rpm (min-1)  120 L (127 US qt, 106 lmp qt)/minute 
Fuel required    UNLEADED petrol with 95 Research Octane Number or higher 
R18A2 ENGINE  Type    Water cooled, 4-stroke SOHC i-VTEC engine 
Cylinder arrangement    Inline 4-cylinder, transverse 
Bore and stroke    81.0 x 87.3 mm (3.19 x 3.44 in.) 
Displacement    1,799 cm3 (110 cu in.) 
Compression ratio    10.5 
Valve train    Chain drive, SOHC i-VTEC 4 valves per cylinder 
Lubrication system    Forced, wet sump, with trochoid pump 
Oil pump displacement  At 6,800 rpm (min-1)  52.3 L (55.3 US qt, 46.0 Imp qt)/minute 
Water pump displacement  At 6,000 rpm (min-1)  104 L (110 US qt, 91.5 Imp qt)/minute 
Fuel required  Except KN model  UNLEADED petrol with 95 Research Octane Number or higher 
KN model  UNLEADED petrol with 91 Research Octane Number or higher 


Item  Measurement  Qualification  Specification 
STARTER  Type    Gear reduction 
Normal output  L13A7 engine model  0.6 kW 
R18A2 engine model  1.0 kW 
Nominal voltage    12 V 
Hour rating    30 seconds 
Direction of rotation    Clockwise as viewed from gear end 
CLUTCH (SPLM Manual Transmission)  Clutch type    Single plate dry, diaphragm spring 
Clutch friction material surface area    172 cm2 (26.66 sq in.) 
CLUTCH (SPHM Manual Transmission)  Clutch type    Single plate dry, diaphragm spring 
Clutch friction material surface area    186 cm2 (28.83 sq in.) 
SPLM MANUAL TRANSMISSION  Type  SPLM  Synchronized, 6-speed forward, 1 reverse 
Primary reduction    Direct 1:1 
Gear ratio  1st  3.462 
2nd  1.870 
3rd  1.235 
4th  0.949 
5th  0.810 
6th  0.727 
Reverse  3.308 
Final reduction  Type  Single helical gear 
Gear ratio  4.750 
SPHM MANUAL TRANSMISSION  Type  SPHM  Synchronized, 6-speed forward, 1 reverse 
Primary reduction    Direct 1:1 
Gear ratio  1st  3.143 
2nd  1.826 
3rd  1.303 
4th  1.054 
5th  0.854 
6th  0.727 
Reverse  4.924 
Final reduction  Type  Single helical gear 
Gear ratio  4.924 


Item  Measurement  Qualification  Specification 
STEERING  Type    Rack and pinion with electrical power-assisted 
Overall ratio  16 inch  11.75 
17 inch  12.01 
Turns, lock-to-lock  16 inch  2.42 
17 inch  2.25 
Steering wheel diameter    360 mm (14.0 in.) 
SUSPENSION  Type  Front  MacPherson strut, coil spring, anti-roll bar 
Rear  Torsion beam, coil spring 
Shock absorber  Front  Telescopic, hydraulic, nitrogen gas-filled 
Rear  Telescopic, hydraulic, nitrogen gas-filled 
TYRES  Size of front and rear    205/55R16 91H, 205/55R16 91V, 225/45ZR17 91Y 
Size of spare    T135/90D15 100M 
BRAKES  Type of service brake  Front  Power-assisted self-adjusting ventilated disc 
Rear  Power-assisted self-adjusting solid disc 
Type of parking brake    Mechanical actuating, rear wheels 
Pad friction surface area  Front  48.6 cm2 (7.5 sq in.) x 2 
Rear  25.1 cm2 (3.9 sq in.) x 2 
Shoe friction surface area  Rear  49.0 cm2 (7.60 sq in.) x 2 
AIR CONDITIONING  Compressor  Type  Scroll 
Capacity  75 mL (4.58 cu in.)/rev. 
Maximum speed  10,000 rpm (min-1) 
Lubricant capacity  75mL (2 1/2 fl oz) 
Lubricant type  SANDEN SP-10 
Condenser  Type  Corrugated fin 
Evaporator  Type  Corrugated fin 
Blower  Type  Sirocco fan 
Motor type  210 W/12 V 
Speed control  Infinite variable 
Maximum capacity  485 m3 (17,100 cu ft)/h 
Temperature control    Air-mix type 
Compressor clutch  Type  Dry, single plate, Poly V-belt drive 
Electrical power consumption at 20 °C (68 °F)  42 W maximum at 12 V 
Refrigerant  Type  HFC-134 a (R-134 a) 
Capacity  440-490 g (15.5-17.2 oz) 


Item  Measurement  Qualification  Specification 
ELECTRICAL RATINGS  Battery  L13A7 engine model  12 V-28 AH/5 hours 
R18A2 engine model  12 V-36 AH/5 hours 
Fuses  Under-hood fuse/relay box  100 A, 70 A, 50 A, 40 A, 30 A, 20 A, 15 A, 10 A, 7.5 A 
Under-dash fuse/relay box  30 A, 20 A, 15 A, 10 A, 7.5 A 
Light bulbs  Headlight high beam  12 V-55 W 
Headlight low beam  12 V-55 W (H11)
12 V-35 W (HID) 
Front turn signal lights  12 V-21 W 
Front side turn signal lights  12 V-5 W 
Front position lights  12 V-5 W 
Front fog lights  12 V-55 W 
Rear fog lights  12 V-21 W 
Rear turn signal lights  12 V-21 W 
Brake/Taillights  12 V-21/5 W 
Inner taillights  12 V-5 W 
High mount brake light  LED 
Back-up lights  12 V-18 W 
License plate light  12 V-5 W 
Ceiling lights  12 V-8 W 
Cargo area light  12 V-5 W 
Map lights  12 V-5 W 
Ambient light  LED 
Vanity mirror lights  12-2 W 
Gauge lights  LED 
Indicator lights  LED 


 
Item  Measurement  Qualification  Standard or New 
Steering wheel  Rotational play measured at outside edge with engine running    0-10 mm (0-0.39 in.) 
Starting load measured at outside edge with engine running    34 N (3.5 kgf, 7.7 lbf) 
Gearbox  Angle of rack guide screw loosened from locked position    7 °±3 ° 


 
Item  Measurement  Qualification  Standard or New  Service Limit 
Wheel alignment  Camber  Front  0 ° 00 ¢±30 ¢ 
Rear  -1 ° 00 ¢±30 ¢ 
Caster  Front  4 ° 14 ¢±30 ¢ 
Total Toe-in  Front  0±2 mm (0±0.08 in.) 
Rear  4±2 mm (0.16±0.08 in.) 
Front wheel turning angle equipped with 205/55R16 91H or 205/55R16 91V tyre  Inward  41 ° 05 ¢±2 ° 
Outward  33 ° 05 ¢ (Reference) 
Front wheel turning angle equipped with 225/45ZR17 91Y tyre  Inward  36 ° 44 ¢±2 ° 
Outward  30 ° 38 ¢ (Reference) 
Wheel  Steel wheel runout  Axial  0-1.0 mm (0-0.04 in.)  2.0 mm (0.08 in.) 
Radial  0-1.0 mm (0-0.04 in.)  1.5 mm (0.06 in.) 
Aluminum wheel runout  Axial  0-0.7 mm (0-0.03 in.)  2.0 mm (0.08 in.) 
Radial  0-0.7 mm (0-0.04 in.)  1.5 mm (0.06 in.) 
Wheel bearing  End play  Front  0-0.05 mm (0-0.002 in.) 
Rear  0-0.05 mm (0-0.002 in.) 


 
Item  Measurement  Qualification  Standard or New  Service Limit 
Parking brake lever  Distance traveled when lever pulled with 196 N (20 kgf, 44 lbf) of force    8 to 9 clicks 
Brake pedal  Pedal height (carpet removed)  LHD  132 mm (5.20 in.) 
RHD  152 mm (5.98 in.) 
Free play    1.0-5.0 mm (0.039-0.20 in.) 
Master cylinder  Piston-to-pushrod clearance    No adjust 
Brake disc  Thickness  Front  22.9-23.1 mm (0.90-0.91 in.)  21.0 mm (0.83 in.) 
Rear  8.9-9.1 mm (0.35-0.36 in.)  7.0 mm (0.28 in.) 
Runout  Front  ———  0.10 mm (0.004 in.) 
Rear  ———  0.10 mm (0.004 in.) 
Parallelism  Front and rear  ———  0.015 mm (0.0006 in.) 
Brake pad  Thickness  Front  11.0 mm (0.43 in.)  1.6 mm (0.06 in.) 
Rear  9.0 mm (0.35 in.)  1.6 mm (0.06 in.) 
Brake booster
- With VSA 
Master cylinder oil pressure  Vacuum
kPa (mmHg, in.Hg) 
Brake pedal pressure
N (kgf, lbf) 
kPa (kgf/cm2, psi) 
0 (0, 0)  98 (10, 22)  0 (0, 0) 
294 (30, 66)  1,220 (12.4, 177) 
66.7 (500, 19.7)  98 (10, 22)  4,270 (43.5, 619) 
294 (30, 66)  12,410 (126.5, 1,799) 
Brake booster
- With ABS 
Master cylinder oil pressure  Vacuum
kPa (mmHg, in.Hg) 
Brake pedal pressure
N (kgf, lbf) 
kPa (kgf/cm2, psi) 
0 (0, 0)  98 (10, 22)  0 (0, 0) 
294 (30, 66)  1,220 (12.4, 177) 
97.3 (730, 28.7)  98 (10, 22)  4,720 (48.1, 684) 
294 (30, 66)  15,670 (159.8, 2,272) 


 
Item  Measurement  Qualification  Standard or New 
Refrigerant  Type    HFC-134a (R-134a) 
Capacity of system    440-490 g (15.5-17.2 oz) 
Refrigerant oil  Type    SANDEN: SP-10
(P/N 38897-P13-003, 38898-P13-003 or 38899-P13-A01) 
Capacity of components  Condenser  20 mL (5/6 fl oz) 
Evaporator  35 mL (1 1/6 fl oz) 
Each line and hose  10 mL (1/3 fl oz, 0.4 Imp oz) 
Compressor  75-85 mL (2 1/2-2 5/6 fl oz, 2.6-3.0 Imp oz) 
Compressor  Field coil resistance  At 20 °C (68 °F)  3.15-3.45 W 
Pulley-to-pressure plate clearance    0.35-0.65 mm (0.014-0.026 in.) 


3 Door Dimensions

3door.gif


5 Door Dimensions

5door.gif