2006+ Honda Civic Forum banner

Bleeding the brakes

7K views 9 replies 4 participants last post by  Dark Stranger  
#1 ·
Hi to all...
Ok. just fitted pads all round and I'm about to start with flushing the brake system..
To which order do i start ? and how much brake fluid do I need to do the job, plus
what brand should I use and dot 3 or dot 4... 1.8 Vtec model.

Cheers in advance..
 
#3 ·
Bleeding Process. Begin at the corner furthest from the driver and proceed in order toward the driver. (Right rear, left rear, right front, left front.) While the actual sequence is not critical to the bleed performance it is easy to remember the sequence as the farthest to the closest.
Plagiarised
 
#5 ·
Bleeding Process. Begin at the corner furthest from the driver and proceed in order toward the driver. (Right rear, left rear, right front, left front.) While the actual sequence is not critical to the bleed performance it is easy to remember the sequence as the farthest to the closest.
Plagiarised
Ok.... I kinder thought that, but getting different opinion's. I used the process with other motors.
Just checking because the Civic might have another procedure.