Mine stopped lighting up with connects2 also. Never got round to checking the fuse / connection etc

Might have a nosey over the weekend

 

I've not installed my connects2 yet. So did it have a backlight or light up when pressed? (or both?)

 

My stoped before connect2 so that can't be problem since its powered on like rest of lights on dash. This is part number 35301-SMG-E01 (14V 60MA) also same one is used on VSA button

 

Fantastic, thank you very much!

Is it easy to replace?

 

Looks like a job over the weekend then, hoping it's just a fuse though as that would save me stripping the dash for the fifth time :lol:

 

I noticed mine was not lit but then I also noticed some of the segments on the radio display were starting to not show as well. Could not be bothered to dismantle the dash to re-solder the display connectors so did the quick fix option of hitting the flat panel in front of the display and above the radio. Guess what, all the segments now light up and as a bonus, the hazard button now glows again.

 

That old chestnut, might give it a whack and see what happens, hopefully the same!


Sent from my iPhone using Tapatalk

 

the Led bulb in the hazard warning light switch has a black cover. Remove the cover before fitting and it will be much brighter.

It doesn't flash when its pushed. You only get the green indicators in the dashboard. It only comes on when you switch on the lights.

To fit the bulb you have to remove centre and lower console, top surround above head unit and remove 4 screws the head unit surround and then pull that back and then you can access the hazard warning switch.

 

Brilliant, that's really useful. Will definitely try and get it done while I am adding the connects2 unit!

Cheers!


Sent from my iPhone using Tapatalk

 

Is the other bulb socket not working? Before it is working but when i change it to led the other bulb wont work